سوابق جايگزين فرهاد دانشجو(ریاست دانشگاه آزاد)
• متاهل - کد ملی 3070920543
• استاد دانشکدۀ مهندسی پلیمر و دانشکده مهندسی پزشکی دانشگاه صنعتی امیرکبیر.
• استاد وابسته دانشگاه علوم پزشکی تهران
• H index: 22 (Scopus)
محل کار :
تهران ، خیابان حافظ، شماره 424، دانشگاه صنعتی امیر کبیر (پلی تکنیک تهران)، دانشکده مهندسی پلیمر
صندوق پستی 4413-15875 کدپستی 34311- 15916
تلفن: 64542420 تلفن/دورنگار: 66492877 همراه : 09121113012
پست اکترونیک: mirzadeh@aut.ac.ir یا mh11365@gmail.com
سایت : http://polymer.aut.ac.ir/autcms/res/upload//polymer-engineering/mirzadeh/Mirzadeh%20.pdf
2- سوابق تحصیلی:
کارشناسی ارشد، طراحی و‌ساخت‌کامپوزیت‌ها بر پایه پلی‌استر و الیاف‌کنف، دانشگاه صنعتی امیرکبیر، ایران 1357.
دکتری تخصصی، بررسی زیست‌سازگاری الاستومر EPR پیوند‌خورده
با‌هیدروژل‌ها به کمک اشعۀ لیزر، دانشگاه نیوساوت ویلز(UNSW) استرالیا،
1373.
3- سوابق اجرایی و مدیریتی :
• فرماندار سیرجان: 1360-1359
• استاندارکرمان : 1364- 1360
• معاون اجرایی نخست وزیر: 1368-1364
• معاون اجرایی رئیس جمهور: 1374 – 1368
• معاون رئیس جمهور و رئیس سازمان برنامه و بودجه: 1376-1374
• دبیر و عضو هیات موسس دانشگاه آزاد اسلامی1386 تا کنون.
• عضو هیات امنا مرکزی دانشگاه آزاد اسلامی1386 تا کنون.
4- سوابق علمی، آموزشی و پژوهشی:
عضو هیات علمی دانشگاه کرمان1358-1373.
استاد دانشگاه صنعتی امیر کبیر، 1373تا کنون.
استاد وابسته دانشگاه علوم پزشکی تهران 1390 تا کنون
عضو هیات علمی پژوهشگاه پلیمر وپتروشیمی ایران، 1389- 1373
4-1 فعالیت‌های آموزشی:
تدریس 19 واحد درسی در دانشکده‌های مهندسی پزشکی و مهندسی پلیمر دانشگاه
صنعتی امیرکبیر و پژوهشگاه پلیمر و پتروشیمی ایران و دانشگاه علوم پزشکی
تهران ( مهندسی بافت) برای دوره‌های کارشناسی، کارشناسی ارشد ودکتری شامل:
• مهندسی بافت، 3 واحد.
• پلیمرها در پزشکی، 3 واحد.
• مبحث زیست سازگاری، 3واحد.
• روشهای اصلاح سطوح پلیمرها، 3 واحد.
• روشهای نوین برای آنالیز سطوح بیوماتریال‌ها، 3 واحد.
• لیزر در پزشکی 2 واحد
• روشهای اصلاح پلیمرها 2 واحد
4- 2 – جوایز و افتخارات :
• برنده جایزه جشنواره بین المللی خوارزمی سال 1373
• برنده جایزه جشنواره بین المللی رازی سال1382
• پژوهشگر نمونه دانشگاه صنعتی امیر کبیر، 1383.
• پژوهشگر نمونه پژوهشگاه پلیمر وپتروشیمی ایران، 1384.
• برگزیده بعنوان بهترین سخنران، سمینار بین المللیISPST 2005 تهران، دانشگاه صنعتی امیرکبیر، مهرماه 1384.
• برگزیده بعنوان مدیر پژوهشی برتر مؤسسات پژوهشی کشور، هفتمین جشنواره پژوهش و فناوری، 1385.
• برنده جایزه جشنواره بین المللی رازی سال 1386
• دریافت لوح تقدیر بعنوان موسس پژوهشگاه پلیمر و پتروشیمی ایران از
هیات امنائ پژوهشگاه و وزیر علوم و تحقیقات وفناوری سال 1385
• دریافت لوح تقدیر بعنوان مدیر مسئول ژورنال برتر با نمایه بین المللی 1386
• پژوهشگر نمونه پژوهشگاه پلیمر وپتروشیمی ایران 1387.
• استاد نمونه کشوری1387.
• دریافت لوح سپاس آموزش و جامعه - دانشگاه صنعتی امیر کبیر- 1391
• منتخب برتر دهمین جشنواره ملی ایده های برتر- تهران هفته پژوهش و فناوری آذر ماه 1391
• پژوهشگر برتر در زمینه مهندسی زیستی – منتخب رئیس ستاد توسعه زیست
فناوری ریاست جمهوری و پژوهشگاه ملی مهندسی ژنتیک و زیست فناوری اسفند
1391
4-3 - زمینه تخصصی:
• مهندسی بافت.( پوست، غضروف و استخوان)
• مبحث زیست‌سازگاری.
• پلیمرهای زیست‌سازگار.
• اصلاح خواص سطحی و آنالیز سطوح بیوماتریال‌ها و نانوساختارهای پلیمری
4-4- فعالیت های پژوهشی
اجرای 70 پروژه پژوهشی به عنوان استاد راهنما یا اجرای طرح مستقل پژوهشی از جمله :
• طرح ملی تولید پلیمرهای زیست‌سازگار با اشعه لیزر که برای اولین بار
در ایران وجهان انجام شد و مقالات منتشره از این طرح مورد مراجعه جامعه
علمی جهانی قرار گرفته است. محل اجرای طرح پژوهشگاه پلیمر و پتروشیمی
ایران.(برنده جایزه جشنواره بین المللی خوارزمی سال 1373).
• طرح ملی حلزون شنوائی (برنده جایزه جشنواره بین المللی رازی سال1382) نتایج این طرح در آمریکاواروپا ثبت اختراع شده است.
• طرح ملی طراحی وساخت چسب طبی زیست سازگارو زیست تخریب پذیر که نتایج آن به تایید وزارت بهداشت ودرمان ج.ا.ا رسیده است.
• طراحی و ساخت غشاء پلی سولفونی برای کاربرد در دیالیز کلیه(برنده جایزه جشنواره بین المللی رازی سال 1385)
• طراحی وساخت ظروف کشت سلولی (برنده جایزه جشنواره بین المللی رازی سال 1386)
• اجرای طرح پوشش الکترود رهاینده داروی ضد التهاب Corticosteroid))،
حلزونی شنوایی به سفارش شرکت اتریشی MED-EL با گرانت 93000 دلار، نتایج این
طرح در آمریکا ثبت اختراع شده است (شروع سال1386) فاز 1.
• اجرای طرح پوشش الکترود رهاینده داروی ضد التهاب Corticosteroid))،
حلزونی شنوایی به سفارش شرکت اتریشی MED-EL با گرانت 96000 یورو، این طرح
در دست اجراست (شروع سال1387) فاز2.
• طرح ساخت پوشش های زخم بر پایه بیو کامپوزیتهای پلیمری که در
بیمارستان شهدای تجریش روی بیماران سوختگی و سالک و زخم پای دیابتی در بخش
پوست آن بیمارستان استفاده و مورد تایید قرار گرفته است و نمونه اینکار
پژوهشی اخیرا به شرح زیر ثبت اختراع بین المللی شده است:
(Us Patent:PUB. NO. US2011/0218472 A1 Sep. 8 2011)
• اجرای طرح پژوهشی " طراحی و ساخت نیمه صنعتی پانسمان های پلیمری زیست
تخریب پذیر بر پایه کیتوسان برای درمان سوختگی ها" صندوق حمایت از
پژوهشگران کشور(طرح شماره:89001749 )
• طراحی و ساخت داربست های نوین نانوساختار بر پایه پلیمرهای طبیعی جهت
درمان زخمهای دیابتی با استفاده از روش الکتروریسندگی نانوالیاف (صندوق
حمایت از پژوهشگران کشور) – همکار طرح.
• در حال حاضراستاد راهنمای 9 پروژه دکتری یا کارشناسی ارشد هستم که در
دست اجراست که جزییات مراتب مذکور و بقیه فعالیت های پژوهشی اینجانب ذیلا
در قسمت 4-8 در صفحه 32این بیوگرافی آورده شده است.
4-5 - سوابق وخدمات علمی- پژوهشی:
• موسس مرکز تحقیقات پلیمر ایران (پژوهشگاه پلیمر وپتروشیمی ایران)1364.
• موسس شهرک‌های تحقیقاتی پژوهش (تهران)1364 و کاوش (کرج)1369.
• موسس مرکز رشد فناوری پلیمر1381.
• مدیر مسئول وسردبیر Progress in Biomaterials ناشر Springer از 2011 تا کنون
• مدیر مسئول و عضو هیئت تحریریه مجله علوم و تکنولوژی پلیمر از سال 1367 تا1390
• مدیر مسئول و سردبیر Iranian polymer Journal از سال 1373 تا1390
(این مجله به عنوان مجله علمی پژوهشی برتر کشور که در JCR توسط موسسه
اطلاعات علمی ISI نمایه نویسی می‌شود در جشنواره پژوهش وفناوری سال1385
انتخاب شد).
• رئیس انجمن پلیمر ایران از 1376 تا کنون ( 6 دوره از 7 دوره).
• عضو هیئت علمی دانشکده‌های مهندسی پلیمر و مهندسی پزشکی، دانشگاه
صنعتی امیرکبیر1373 تاکنون .موسس و مسئول آزمایشگاه لیزر پلیمر در سازمان
انرژی اتمی ایران (1369 تا 1387).
• موسس و مسئول آزمایشگاه مهندسی بافت در دانشکده مهندسی پزشکی دانشگاه صنعتی امیرکبیر (1373 تا 1388).
• موسس و مسئول آزمایشگاه بیوپلیمر در دانشکده مهندسی پلیمر دانشگاه صنعتی امیر کبیر (1373 تا کنون).
• مدیر گروه بیوماتریال پژوهشگاه پلیمر ایران از مرداد 1373 تا شهریور 1378.
• رئیس پژوهشگاه پلیمر و پتروشیمی ایران از مرداد 1378 تا مرداد 1389.
• عضو انجمن بیوماتریال آمریکا (Society for Biomaterials) از سال 2000 تا کنون.
• عضو انجمن شیمی و مهندسی شیمی ایران1372 تا کنون ..
• عضو انجمن سامانه‌های نوین دارورسانی ایران 1383 تا کنون .
• عضو هیئت تحریریه مجله بین المللی Artificial Organs, John Wiley ازسال 2008 تا کنون .
• عضو هیئت تحریریه فصل نامه علمی پژوهشی لیزر در پزشکی (Laser in Medicine) از سال 2010 تا کنون .
• عضو هیئت تحریریه مجله بین المللی انجمن شیمی ایران ( (JICSاز سال 2005 تاکنون.
• عضو کمیتۀ علمی و رئیس کمیته میان گروهی صندوق حمایت از پژوهشگران کشور- ریاست جمهوری1383-1391 .
• عضو هیئت امناء پژوهشگاه استاندارد ایران 1384-1389 .
4-6- داور مقالات علمی برای ژور نالهای ملی و بین المللی به شرح زیر :
1. Artificial Organs, Official Journal of ISAO, INFA and ISRP Published by Blackwell.
2. Journal Biochimica et Biophysica Acta (BBA - Biomembranes) Published by Elsevier.
3. Journal of Applied Polymer Science (English), Published by John Wiley & Sons, Inc.
4. Iranian Polymer Journal (English), Published by IPPI Press.
5. Biomacromolecules, Published by ACS Publications.
6. Iranian Journal of Chemical Engineering; (English), Published by the Iranian Association of Chemical Engineers (IACHE).
7. Iranian Journal of Polymer Science &Technology (Persian), Published by the Iran Polymer Society.
8. Iranian Journal of Chemistry& Chemical Engineering (English& Persian), Published by the Jahad Daneshgahi.
9. Journal of Iranian Medical Engineering Society, (Persian).
10. Journal of the Iranian Chemical Society (JICS), Published by Iranian Chemical Society (English).
11. Carbohydrate Polymers, Published by Elsevier.
12. Journal of Biomedical Materials research, PartA, Published by John Wiley.
13. Green Chemistry Letters and Reviews, Published by Taylor and Francis.
14. Journal of Nanomaterials, Hindawi Publishing Corporation.
15. Journal of Biomaterials Applications, published by Sage publications.
16. Materials Science and Engineering C, published by Elsevier.
17. ACS Applied Materials & Interfaces, ACS publication.
18. European Journal of Medicinal Chemistry, published by Elsevier.
19. Journal of Industrial and Engineering Chemistry, published by Elsevier.
4-7- آثار منتشر شده:
الف) مقالات در مجلات با نمایه های بین المللی:
1. Mohammad A. Semsarzadeh, Abdol R. Lotfali and Hamid Mirzadeh,
Jute Reinforced Polyester Structures, Polymer Composites, 5 (2) 141-142,
1984.
2. Mohammad A. Semsarzadeh, Hamid Mirzadeh and Abdol R. Lotfali,
Unsaturated Polyester Resin Bulk Reinforcing by Jute Fibers, Iranian
Journal of Polymer Science and Technology, 2 (2) 94-97, 1989.
3. Hamid Mirzadeh, A.A. Katbab, R.P. Burford, CO2 – Pulsed Laser
Induced Surface Grafting of Acrylamide onto Ethylene-Propylene Rubber
(EPR), Part I, Radiation Physics and Chemistry, 41 (3) 507-519, 1993.
4. Hamid Mirzadeh, A.A. Katbab, R.P. Burford, CO2 – Pulsed Laser
Induced Surface Grafting of Acrylamide onto Ethylene-Propylene Rubber
(EPR), Part II, Radiation Physics and Chemistry, 42 (1-3) 53-56, 1993.
5. Hamid Mirzadeh, M.T. Khorasani, A.A. Katbab, R.P. Burford,
Surface Modification of EPR as Biomaterial by Laser Induced Graft
Copolymerization of AAm, HEMA, NVP, I: AAm, Iranian Journal of Polymer
Science and Technology, 6 (1) 4-16, 1993.
6. Hamid Mirzadeh, A.A. Katbab, M.T. Khorasani, R.P. Burford, CO2 –
Laser Induced Surface Grafting of HEMA and NVP onto Ethylene-Propylene
Rubber as Biocompatible Material, Angewandte Makromolekulare Chemie, 218
() 23-40, 1994.
7. Hamid Mirzadeh, M.T. Khorasani, A.A. Katbab, R.P. Burford , Z.
Soheili, A. Golestani, B. Goliaei, Biocompatibility Evaluation of Laser
Induced AAm and HEMA Grafted EPR: I-in vitro Study, Clinical Materials,
16 (4) 177-187, 1994.
8. Hamid Mirzadeh, A.A. Katbab, M.T. Khorasani, R.P. Burford,
Surface Modification of EPR as Biomaterial by Laser Induced Graft
Copolymerization of Aam, HEMA and NVP: II-HEMA and NVP, Iranian Journal
of Polymer Science and Technology, 7 (3) 160-173, 1994.
9. Hamid Mirzadeh, A.A. Katbab, R.P. Burford, CO2 – Laser Graft
Copolymerization of HEMA and NVP onto Ethylene-Propylene Rubber (EPR) as
Biomaterial- (III), Radiation Physics and Chemistry, 46 (4-6) 859-862,
1995.
10. Hamid Mirzadeh, A.A. Katbab, M.T. Khorasani, R.P. Burford , E.
Gorgin, A. Golestani, Cell Attachment to Laser Induced AAm- and
HEMA-Grafted Ethylene–Propylene Rubber as Biomaterial: in vivo Study,
Biomaterials, 16 (8) 641- 648, 1995.
11. Mohammad Khorasani, Hamid Mitzadeh and Peter Sammes, PDMS
Surface Modification by Laser Irradiation: A Novel Technique for the
Preparation of Blood Compatible Polymers, Iranian Journal of Polymer
Science and Technology, 8 (2) 77-86, 1995.
12. Hamid Mirzadeh, Ahmad-Reza Ekbatani and Ali-Asghar Katbab,
Surface Modification of Ethylene Propylene Rubber by Laser Grafting of
Acrylic Acid, Iranian Polymer Journal, 5 (4) 225-230, 1996.
13. Mohammad Khorasani, Hamid Mitzadeh and Peter Sammesl, Laser
Induced Surface Modification of PDMS as a Super- hydrophobic Material,
Radiation Physics and Chemistry, 47 (6) 881-888, 1996.
14. H. Mirzadeh, The Present Status of Iran’s Natural Gas Industry
and its Importance in Country’s Future Development Programming, Iranian
Journal of Polymer Science and Technology, 9 (2) 121-128, 1996.
15. Hamid Mirzadeh and N.Zargham, Report on the Global Knowledge’
97, Knowledge for Development in the Information Age, Rahyaft, 16
(summer & autumn), 153-156, 1997.
16. Mohammad Khorasani, Hamid Mitzadeh and Peter Sammes,
Polydimethylsiloxane Surface Modification by Laser Irradiation: A Novel
Technique for the Preparation of Blood Compatible Materials, Surface
Modification Technologies X, the Institute of materials, London, T.S.
Sudarshan (Ed.), pp. 499-507, 1997.
17. Hamid Mitzadeh, Mohammad Khorasani and Peter Sammes, Laser
Surface Modification of Polymers: A Novel Technique for the Preparation
of Blood Compatible Materials- (II) in vitro Assay, Iranian Polymer
Journal,7 (1) 5-13, 1998.
18. M. Rezai Darvishi, Hamid Mirzadeh and M. Mehrabzadeh,
Preparation and Investigation of Physical and Mechanical Properties of
Biocompatible Blend Based on PDMS/PHEMA, Iranian Journal of Polymer
Science and Technology, 11 (3) 155-162, 1998.
19. M. T. Khorasania, Hamid Mirzadeh and P. G. Sammes, Laser Surface
Modification of Polymers to Improve Biocompatibility: HEMA Grafted
PDMS, in vitro Assay-III, Radiation Physics and Chemistry, 55 (5-6)
685-689, 1999.
20. Mahrokh Dadsetan, Hamid Mirzadeh, Naser Sharifi-Sanjani, Effect
of CO2 Laser Radiation on the Surface Properties of Polyethylene
Terephthalate, Radiation Physics and Chemistry, 56 (5-6) 597-604, 1999.
21. Mahrokh Dadsetan, Hamid Mirzadeh, Naser Sharifi-Sanjani,
Evaluation of the Excimer and CO2 Laser Effects on the Surface
Properties of Polyethylene Terephthalate, Iranian Journal of Polymer
Science and Technology, 12 (1) 3-12, 1999.
22. Mahrokh Dadsetan, Hamid Mirzadeh, Naser Sharifi-Sanjani and
Pirouz Salehian, IR Laser Surface Modification of Polyethylene
Terephthalate as Biomaterial, Processing and Fabrication of Advanced
Materials VIII, Singapore, 221-229, 1999.
23. Mahrokh Dadsetan, Hamid Mirzadeh, Naser Sharifi-Sanjani, Surface
Modification of PET by CO2 Laser Graft Copolymerization of Acrylamide,
Journal of Applied Polymer Science, 76 (3) 401-407, 2000.
24. Hamid Mirzadeh, M. Ali Mohagheghi, Hossein Ahrnadi, Hamid
Mirkhani, Saeed Amanpour and Pirooz Salehian, Cartilage Tissue
Engineering for Ear as in Rabbit Model with Perforated Polyurethane:
In-vivo Assay, Iranian Polymer Journal, 9 (2) 73-80, 2000.
25. N. Sheikh, A.A. Katbab and Hamid Mirzadeh, Isocyanate-Terminated
Urethane Prepolymer as Bioadhesive Material: Synthesis and
Characterization, International Journal of Adhesion & Adhesives, 20
(4) 299-304, 2000.
26. Fateme Shokrolahi, Hamid Mirzadeh and M. T. Khorasania,
Determination of Crosslinking Density of Polydimethylsiloxane Network by
Calorimetry and its Comparison with Equilibrium Swelling Method,
Iranian Journal of Polymer Science and Technology, 12 (4) 221-227, 2000.
27. M.R. Jafari, Hamid Mirzadeh, Y. Eslami and H. Amini,
Manufacturing of a Polymeric Ocular Prosthesis for Therapy of Glaucoma,
Iranian Journal of Polymer Science and Technology, 13 (1) 3-11, 2000.
28. Mahrokh Dadsetan, Hamid Mirzadeh and Naser Sharifi-Sanjani, IR
Laser Surface Modification of Polyethylene Terephthalate as a
Biomaterial, Iranian Polymer Journal, 9 (4) 203-210, 2000.
29. N. Sheikh, Hamid Mirzadeh, A.A. Katbab, P. Salehian, M. Daliri ,
S. Amanpour, Isocyanate-terminated Urethane Prepolymer as Bioadhesive
Material: Evaluation of Bioadhesion and Biocompatibility, in vitro and
in vivo assays, Journal of Biomaterials Science, Polymer Edition, 12 (7)
707-734, 2001.
30. M. Dadsetan, Hamid Mirzadeh, N. Sharifi-Sanjani and P. Salehian,
in vitro Studies of Platelet Adhesion on the Laser Treated Polyethylene
Terephthalate Surface, Journal of Biomedical Materials Research, 54 (4)
540-546, 2001.
31. M Dadsetan, Hamid Mirzadeh, N. Sharifi-Sanjani and M. Daliri,
Cell Behavior on Laser Surface- Modified PET in vitro, Journal of
Biomedical Materials Research, 57 (2) 183-189, 2001.
32. Nasrin Sheikh, Hamid Mirzadeh and Ali Akbar Katbab, Reactive
Ester –Urethane Prepolymer as Bioadhesive: Synthesis and Evaluation,
Iranian Polymer Journal, 10 (1) 3-7, 2001.
33. Oleg Olegovich Nikolaev, Vladislav Borisovich Urhanov, Vladislav
Pavlovich Britov, Alexander Dmitrievich Babaev, Valeri Vladimirovich
Bogdanov and Hamid Mirzadeh, A thermoplastic Rubber Composition for
Medical Purposes, Iranian Polymer Journal, 10 (1) 9-14, 2001 .
34. Farhang Abbasi, Hamid Mirzadeh and Ali-Asgar Katbab,
Modification of Polysiloxane Polymers for Biomedical Applications: A
Review, Polymer International, 50 (12) 1279-1287, 2001.
35. Majid Ghiass, Bahram Dabir, Manouchehr Nikazar, Alejandro D. Rey
and Hamid Mirzadeh, Monte Carlo Simulation of Non-Linear Free Radical
Polymerization Using a Percolation Kinetic Gelation Model (I): Free
Radical Homopolymerization, Iranian Polymer Journal, 10 (5) 305-313,
2001.
36. F. Abbasi, Hamid Mirzadeh and A. A. Katbab, Sequential
Interpenetrating Polymer Networks of Poly (2-hydroxyethyl methacrylate)
and Polydimethylsiloxane, Journal of Applied Polymer Science, 85 (9)
1825-1813, 2002.
37. F. Abbasi, Hamid Mirzadeh and A. A. Katbab, Comparison of
Viscoelastic Properties of PDMS/PHEMA IPN’s with Their Physical Blends,
Journal of Applied Polymer Science, 86 (14) 3480-3485, 2002.
38. Hamid Mirzadeh, M. Dadsetan and N. Sharifi-Sanjani, Platelet
Adhesion on Laser Induced Acrylic Acid Grafted Polyethylene
Terephthalate, Journal of Applied Polymer Science, 86 (13) 3191-3196,
2002.
39. Nakisa Yaghobi, Hamid Mirzadeh and Farzin Hormozi, Optimization
of Chitin Isolation from Shrimp Shells: Study of Parameters influence on
Chitin Deacetylation Reaction and Biocompatibility Evaluation (in
vitro), Iranian Journal of Polymer Science and Technology, 15 (1)55-63,
2002.
40. Hamid Mirzadeh, Nakisa Yaghobi, Saeed Amanpour, Hossein Ahmadi,
M. Ali Mohagheghi and Farzin Hormozi, Preparation of Chitosan Derived
from Shrimp’s Shell of Persian Gulf as a Blood Hemostasis Agent: in
vivo, Iranian Polymer Journal, 11 (1) 63-68, 2002.
41. S. Kheirandish, E. Jabbari and Hamid Mirzadeh, et.al, Effect of
Hydrogel content on Properties of a Composites Based on RTV Silicone
Rubber on Matrix and Crosslinked Poly (acrylic acid) Particles as the
Dispersed Phase, Iranian Journal of Polymer Science and Technology, 15
(1) 13-21, 2002.
42. Farhang Abbasi, Hamid Mirzadeh and Ali-Asgar Katbab, Bulk and
Surface Modification of Silicon Rubber for Biomedical Applications,
Polymer International, 51 (10) 882-888, 2002.
43. Hamid Mirzadeh, Fateme Shokrolahi and Morteza Daliri, Effect of
Silicone Rubber Crosslink Density on Fibroblast Cells Behavior: in
vitro, Journal of Biomedical Materials Research, 67A (3) 727-732, 2003.
44. D. Fallahi, Hamid Mirzadeh and M. T. Khorasani, Physical,
Mechanical and Biocompatibility Evaluation of Three Different Types of
Silicone Rubber, Journal of Applied Polymer Science, 88 (10) 2522–2529,
2003.
45. Hamid Mirzadeh and M. Dadsetan, Influence of Laser Surface
Modifying of Polyethylene Terephthalate on Fibroblast Cell Adhesion,
Radiation Physics and Chemistry, 67 (3-4) 381-385, 2003.
46. S. Bahram Bahrami, Soheila S. Kordestani, Hamid Mirzadeh and
Parvin Mansoori, Poly vinyl alcohol /Chitosan Blends: Preparation,
Mechanical and Physical Properties, Iranian Polymer Journal, 12 (2)
139-146, 2003.
47. Hassan Arabi, Hamid Mirzadeh, Seyed Hossein Ahmadi and Saeed
Amanpour, Coating of Polyester Fabric with Graphite Composition to
Produce Thrombo-Resistant Vascular Grafts Part 1: Coating Technique and
in vitro Study, Iranian Polymer Journal, 12 (2) 147-152, 2003.
48. F. Abbasi and Hamid Mirzadeh, Properties of
Poly(dimethylsiloxane)/Hydrogel Multicomponent Systems, Journal of
Polymer Science Part B: Polymer Physics, 41 (18) 2145-2156, 2003.
49. M.T. Khorasani, B. Sadatnia And Hamid Mirzadeh, Evaluation of
Effective Parameters on Cooling Period in Cryoaccumulator Gels, Iranian
Journal of Polymer Science and Technology, 15 (6) 387-394, 2003.
50. GH.R. Bakhshandeh, Hamid Mirzadeh, M.T. Khorasani, F. Abbasi, F.
Shokr Elahi And A. Parvin, Manufacture and Investigation of Mechanical
Properties and Blood Compatibility of Silicone O-Ring Used in Dialyzers,
Iranian Journal of Polymer Science & Technology, 16 (1) 41-49,
2003.
51. M.T. Khorasani, Hamid Mirzadeh and Z. Kermani, Surface
Modification of Silicone Elastomer to Increase Hydrophobicity, Iranian
Journal of Polymer Science and Technology, 16 (3) 175-181, 2003.
52. H. Arabi, Hamid Mirzadeh, S.H. Ahmadi, S. Amanpour, S. Rabbani,
A. Abdi, In vitro and in vivo Hemocompatibility evaluation of Graphite
Coated Polyester Vascular Grafts, The International Journal of
Artificial Organs, 27 (8) 691-698, 2004.
53. Nakisa Yaghobi and Hamid Mirzadeh, Enhancement of Chitin’s
Degree of Deacetylatin Using Multi-Stage Alkali Treatment, Iranian
Polymer Journal, 13 (2) 131-136, 2004.
54. F. Abbasi and Hamid Mirzadeh, Adhesion between modified and
unmodified poly(dimethylsiloxane) layers for a biomedical application ,
International Journal of Adhesion & Adhesives, 24 (3) 247-257, 2004.
55. M. T. Khorasani and Hamid Mirzadeh, In vitro Blood compatibility
of Modified PDMS Surfaces as a Superhdrophobic and Superhydrophilic
Materials, Journal of Applied Polymer Science, 91 (3) 2042-2047, 2004.
56. Hamid Mirzadeh and F. Abbasi, Segmented Detachable Structure
Cochlear Implants’ Electrodes for Close-Hugging Engagement with the
Modiolus; Journal of Biomedical Materials Research, B, Applied
Biomaterials, 15 68(2) 191-198, 2004.
57. R. Ghavamzadeh, V. Haddadi-Asl and Hamid Mirzadeh, Bioadhesion
and Biocompatibility Evaluation of Gelatin and Polyacrylic Acid as a
Crosslinked Hydrogel: in vitro, Journal of Biomaterials Science, Polymer
Edition, 15 (8) 1019-1031, 2004.
58. M.T. Khorasani and Hamid Mirzadeh, BHK Cells Behaviour on Laser
Treated PDMS Surfaces, Colloids and Surfaces, an International Journal
B: Biointerfaces, 35 (1) 67-71, 2004.
59. J. Barzin, S. S. Madaeni, Hamid Mirzadeh, M. Mehrabzadeh, Effect
of Polyvinylpyrrolidone on Morphology and Performance of Hemodialysis
Membrane Prepared from Polytether Sulfone, Journal of Applied Polymer
Science, 92 (6) 3804–3813, 2004.
60. Jalal Barzin, C. Feng, K.C. Khulbe, T. Matsuura, S.S. Madaeni
and Hamid Mirzadeh, Characterization of Heat Treated PES-PVP
Hemodialysis Membrane by Ultrafiltration and Atomic Force Microscopy,
Journal of Membrane Science, 237 () 77-85, 2004.
61. M. T. Khorasani and Hamid Mirzadeh, Laser Surface Modification
of Silicone Rubber to Reduce Platelet Adhesion, Journal of Biomaterials
Science, Polymer Edition, 15 (1) 59-72, 2005.
62. Jalal Barzin, S. Siavash Madaeni and Hamid Mirzadeh, Effect of
Preparation Conditions on Morphology and Performance of Hemodialysis
Memberanes Prepared from Polyether Sulfone (PES) and Polyvinyl
Pyrrolidone (PVP), Iranian Polymer Journal, 14 (4) 353-360, 2005.
63. S. Amanpour, H. Ahamadi, Hamid Mirzadeh, M.A. Mohagheghi and S.
Rabbani, Long Term Evaluation of Laser-Treated Silicone (LTS) Membrane
as a Pericardial Substitute: In Vivo Study, Journal of Long-Term Effects
of Medical Implants, 15 (4) 347-353, 2005.
64. M.T. Khorasani, Hamid Mirzadeh and Z. Kermani, Wettability of
Porous PDMS Surface: Morphology Study, Applied Surface Science, 242
(3-4) 339-345, 2005.
65. MT Khorasani, M Zaghiyan and Hamid Mirzadeh, Ultra High
Molecular Weight Polyethylene and Polydimethylsiloxane Blends as
Acetabular Cup material ,Colloids and Surfaces, an International Journal
B: Biointerfaces, 41 (2-3) 169-174, 2005.
66. Saeid Karbasi, Hamid Mirzadeh, Fariba Orang and Jill P.G. Urban,
et.al, A Comparison Between Cell Viability of Chondrocytes on a
Polyurethane Biodegradable Scaffold and Alginate Beads in Different
Oxygen Tension and pH, Iranian Polymer Journal, 14 (9) 823-830, 2005.
67. M. Khakpour, A. Jamshidi, A. A. Entezami and Hamid Mirzadeh,
et.al, HPTLC Procedure for Determination of Levonogestrel in Drug
Release Media of an In – situ Forming Delivery System , Journal of
Planner Chromatography- Modern- TLC (JPC), 104 (18) 331-334, 2005.
68. S. Karbasi, Hamid Mirzadeh and F. Orang, Evaluation of Physical
Environment on Chondrocytes Cells Metabolism Seeded on a Biodegradable
Polyesterurethane Scaffold for Articular Cartilage Tissue Engineering ,
Iranian Journal of Polymer Science and Technology, 18 (6) 383-390, 2005.
69. T. Dolatabadi Farahani , E. Vasheghani Faraahani And Hamid
Mirzadeh, Swelling Behavior of Alginate-N, O-Carboxymethyl Chitosan Gel
Beads Coated by Chitosan, Iranian Polymer Journal, 15 405-415 , 2006.
70. F. Abbasi , Hamid Mirzadeh and M. Simjoo, Hydrophilic
Interpenetrating Polymer Networks of Polydimethyl siloxane (PDMS) as
Biomaterial for Cochlear Implants, Journal of Biomaterials Science.
Polymer Edition, 17 (3), 247-368, 2006.
71. Yasser Ghazizadeh, Hamid Mirzadeh, Saeed Amanpour, Hossien
Ahmadi and Shahram Rabbani, Investigation of Effectiveness of Chitosan
Hydrogel to Stop Bleeding and Air Leakage from Lung Fistula: In Vivo
Study, Iranian Polymer Journal, 15 (10) 821-828, 2006.
72. M.T. Khorasani, S. MoemenBellah, Hamid Mirzadeh and B. Sadatnia,
Effect of surface Charge and Hydrophobicity of Polyurethane and
Silicone Rubbers on L929 Cells Response, Colloids and Surfaces, an
International Journal B: Biointerfaces, 51 (2) 112-119, 2006.
73. Shadab Bagheri, Hamid Mirzadeh, Effect of Radio Frequency Plasma
on Polystyrene Surface Properties, Iranian Journal of Polymer Science
and Technology, 19 (5) 395-402, 2006.
74. E. Takácsa, Hamid Mirzadeh, L. Wojnárovits, J. Borsac, M.
Mirzataheri and N. Benke, Comparison of Simultaneous and Pre-irradiation
Grafting of N-vinylpyrrolidone to Cotton–Cellulose, Nuclear Instruments
and Methods in Physics Research Section B ( NIMB Journal), 265 (1)
217-220, 2007.
75. A. Karkhaneh, Hamid Mirzadeh and A. R. Ghaffariyeh, Simultaneous
Graft Copolymerization of 2-Hydroxyethyl Methacrylate and Acrylic Acid
onto PolydimethylSiloxane Surfaces Using a Two-Step Plasma Treatment
(TSPT), Journal of Applied Polymer Science, 105 (4) 2208-2217, 2007.
76. H Mojgan Zandi, Hamid Mirzadeh and Christian Mayer, Early Stages
of Gelation in Gelatin Solution Detected by Dynamic Oscillating
Rheology and Nuclear Magnetic Spectroscopy, European Polymer Journal, 43
(4) 1480–1486, 2007.
77. Mohammad Imani, Shahriar Sharifi, Hamid Mirzadeh and Farshid
Ziaee, Monitoring of PEG-Diacrylate-based Hydrogel Formation by Real
Time NMR Spectroscopy, Iranian Polymer Journal, 16 (1) 13-20, 2007.
78. A. Toloe, Hamid Mirzadeh, F. Moztarzadeh, M. T. Khorasani, S.
Amanpour, R. Moradi, Biological Evaluation of PDMS /HA and PDMS / β-TCP
Composites Used for Fabrication of Acetabular Cup in Hip Joint
Prosthesis: in vitro and in vivo, Amirkabir Journal of Science and
Technology, (EBS) 17 (65-A) 19-26, Fall 2006- Winter, 2007.
79. Yousef Mohammadi, Hamid Mirzadeh, Fathollah Moztarzadeh, Masoud
Soleimani and Esmaiel Jabbari, Osteogenic Differentiation of Mesenchymal
Stem Cells on Novel Three-Dimensional
PLLA/Chitosan/Gelatin/beta-Tricalcium Phosphate Hybrid Scaffolds,
Iranian Polymer Journal, 16 (1) 57-69, 2007.
80. H. Mirzadeh and Sh. Bagheri, Comparison of the Effect of Excimer
Laser Irradiation and RF Plasma Treatment on Polystyrene Surface,
Radiation Physics and Chemistry, 76 (8-9) 1435-1440, 2007.
81. M.T. Khorasani and H. Mirzadeh, Effect of Oxygen Plasma
Treatment on Surface Charge and Wettability of PVC Blood Bag—In vitro
Assay, Radiation Physics and Chemistry,76 (6) 1011-1016, 2007.
82. Kourosh Kabiri, Hamid Mirzadeh and Mohammad J. Zohuriaan- Mehr,
Highly Rapid Preparation of Bio-nanoclay with Chitosan, Iranian Polymer
Journal, 16 (3) 147-151, 2007.
83. S. Mojtaba Taghizadeh, Hamid Mirzadeh, Mehdi Barikani and Maryam
Yousefi, The Effect of Poly(vinylpyrrolidone) Concentration on Peel
Strength of Acrylic/PVP Pressure Sensitive Adhesive Blends, Iranian
Polymer Journal, 16 (4) 297-285, 2007.
84. Mohammad Rafienia, Hamid Mirzadeh, Hamid Mobedi and Ahmad
Jamshidi, In Vitro Evaluation of Drug Solubility and Gamma Irradiation
on the Release of Betamethasone under Simulated In Vivo Conditions,
Journal of Bioactive and Compatible Polymers, 22 (4) 443-459, 2007.
85. Yousef Mohammadi, Hamid Mirzadeh, Elah Moztarzadeh Fath, Masoud
Soleymani,E. Jabari, Design and Fabrication of Biodegradable Porous
Chitosan/Gelatin/ Tricalcium Phosphate Hybrid Scaffolds for Tissue
Engineering, Iranian Journal of Polymer Science and Technology, 20 (3)
297-308, 2007.
86. MB Eslaminejad, Hamid Mirzadeh, Y Mohamadi and A. Nickmahzar,
Bone Differentiation of the Marrow-derived Mesenchymal Stem Cells Using
Beta- tricalcium Phosphate/Alginate/Gelatin Hybrid Scaffolds, Journal of
Tissue Engineering and Regenerative Medicine, 1 (6) 417–424, 2007.
87. Mojgan Zandi, Hamid Mirzadeh and Christian Mayer, Effect of
Temperature and pH on Chain Mobility of Gelatin during Early Stages of
Gelation, Iranian Polymer Journal, 16 (12) 1-10, 2007.
88. R.A. Mahdinavaz Aghdam, Hamid Mirzadeh ,M. Daliri ,A. Zare,
Evaluation of E-Coli Adhesion onto KrF and CO2 Laser- Treated PET: in
vitro, Iranian Journal of Biomedical Engineering, 1 (1) 19-28, 2007.
89. K. Kabiri, H. Mirzadeh and M. J. Zohuriaan-Mehr, Undesirable
Effects of Heating on Hydrogels, Journal of Applied Polymer Science, 110
(6) 3420–3430, 2008.
90. A. Parvin, H. Mirzadeh and M. T. Khorasani, Physico-Chemical and
Biological Evaluation of Plasma-Induced Graft Polymerization of
Acrylamide onto Polydimethylsiloxane, Journal of Applied Polymer
Science, 107 (4) 2343–2349, 2008.
91. Sharifi S, Hamid Mirzadeh, Imani M, Atai M, Ziaee F, et.al,
Photopolymerization and shrinkage kinetics of in situ crosslinkable
N-vinyl-pyrrolidone/poly(-caprolactone fumarate) networks, Journal of
Biomedical Materials Research Part A, 84 (2) 545-556, 2008.
92. M.T. Khorasani, Hamid Mirzadeh and S. Irani, Plasma Surface
Modification of Poly(L-lactic acid) and Poly(lactic-co-glycolic acid)
Films for Improvement of Nerve Cells Adhesion, Radiation Physics and
Chemistry, 77 (3) 280-287, 2008.
93. Hamid Keshvari, Hamid Mirzadeh, Parvin Mansoori, Fariba Orang
and Mohammad T Khorasani, Collagen Immobilization onto Acrylic Acid
Laser-grafted Silicone: In Vitro, Iranian Polymer Journal, 17 (3) 1-11,
2008.
94. Azadeh S. Hashemi Doulabi, Shahriar Sharifi, Hamid Mirzadeh,
Mohammad Imani, Mohammad Atai and Shahram Mehdipour-Ataei, Synthesis and
Preparation of Biodegradable and Visible Light Crosslinkable
Unsaturated Fumarate-based Networks for Biomedical Applications,
Polymers for Advenced Technologies, 19 (9) 1199- 1208, 2008.
95. S. Mojtaba Taghizadeha, Hamid Mirzadeh, Mehdi Barikania and
Maryam Yousefia, Miscibility and tack of blends of
poly(vinylpyrrolidone)/acrylic pressure sensitive adhesive,
International Journal of Adhesion and Adhesives, 29 (3) 302-308, 2008.
96. E. Nejatia, Hamid Mirzadeh and M. Zandi, Synthesis and
Characterization of Nano-hydroxyapatite Rods/poly(L-lactide
acid)Composite Scaffolds for Bone Tissue Engineering, Composites: Part A
39 (10) 1589–1596, 2008.
97. Shahriar Sharifi, Hamid Mirzadeh, Mohammad Imani, Farshid Ziaee,
Maryam Tajabadi, Ahmad Jamshidi and Mohammad Atai, Synthesis,
Photocrosslinking Characteristics and Biocompatibility Evaluation of
N-vinyl pyrrolidone /polycaprolactone FumarateBiomaterials Using a New
Proton Scavenger, Polymers for Advance Technologies, 19 (12) 1828-1838,
2008.
98. H. Keshvari,Hamid Mirzadeh ,Parvin Mansouri And A.R. Zare
Shahneh , Study of Fibroblast Cell Behavior on the Acrylic Acid CO2
Pulsed Laser Grafted Silicone Elastomer for Tissue Engineering
Applications, Lasers in Medicine,5, 22-29, 2008.
99. Jaber Emami, Hamed Hamishehkar, Abdolhossien Rouholamini
Najafabadi, Kambiz Gilani, Mohsen Minaiyan, Hamid Mahdavi, Hamid
Mirzadeh, Amir Fakhari and Ali Nokhodchi, Particle Size Design of PLGA
Microspheres for Potential Pulmonary Drug Delivery Using Response
Surface Methodology, Journal of Microencapsulation, Journal of
Microencapsulation, 26 (1) 1–8, 2009.
100. Eslaminejad MB, Hamid Mirzadeh, Nickmahzar A, Mohamadi Y and
Mivehchi H., Synthesis, Characterization and Biocompatibility of Novel
Injectable,Biodegradable and In Situ Crosslinkable Polycarbonate-based
Macromers, Journal of Biomedical Materials Research Part A, 90
(2)830-843, 2009.
101. M.B. Eslaminejad, Hamid Mirzadeh, A. Nickmahzar, Y. Mohamadi,
H. Mivehchi, Type I Collagen Gel in Seeding Medium Improves Murine
Mesencymal Stem Cell Loading Onto the Scaffold Increases Their
Subsequent Proliferation, and Enhances Culture Mineralization, J
Biomedical Materials Research Part B: Applied Biomaterials , 90 (2)
659–667, 2009.
102. Taghizadeh SM, Soroushnia A, Hamid Mirzadeh and Barikani M.,
Preparation and In Vitro Evaluation of a New Fentanyl Patch Based on
Acrylic/Silicone Pressure Sensitive Adhesive Blends, Drug Development
and Industrial Pharmacy, 35 (4) 487-498, 2009.
103. Sharifi S, Hamid Mirzadeh, Imani M, Rong Z, Jamshidi A,
Shokrgozar M, Atai M and Roohpour N., Injectable In situ Forming Drug
Delivery System based on Poly(epsilon –Caprolactone Fumarate for
Tamoxifen Citrate Delivery:Gelation Characteristics, In vitro Drug
Release and Anti-Cancer Evaluation, Acta Biomaterialia, 5 (6) 1966–1978,
2009.
104. Kourosh Kabiri, Hamid Mirzadeh, Mohammad J Zohuriaan-Mehr and
Morteza Daliri, Chitosan-modified Nanoclay-poly(AMPS) Nanocomposite
Hydrogels with Improved Gel Strength, Polymer International, 58 (11)
1252-1259, 2009.
105. Z. Mohamadnia, E. Ahmadi, M. Rafienia, Hamid Mirzadeh and H.
Mobedi, Investigation of Drug Release and 1H-NMR Analysis of the in situ
Forming Systems Based on Poly(lactide-co-glycolide), Polymers for
Advanced Technologies, 20 (1) 48–57, 2009.
106. Mohammad Rafienia, Shahriar H. Emami, Hamid Mirzadeh, Hamid
Mobedi and Saeed Karbasi, Influence of Poly (Lactide-Co-Glycolide) Type
and Gamma Irradiation on the Betamethasone Acetate Release from the In
Situ Forming Systems, Current Drug Delivery, 6 (2) 184-191, 2009.
107. Ali Talebi, M.T. Khorasani, Hamid Mirzadeh, Fabrication of
Porous Scaffolds from Poly(D,L-lactic acid) by Liquid-Liquid Phase
Separation, Iranian Journal of Polymer Science and Technology, 21 (6)
495-501, 2009.
108. Saeid Amanpour, Atefeh Solouk, Hamid Mirzadeh, Mohammad-Ali
Mohagheghi, Shahram Rabbani and Farokh Tirgari, In Vitro and In Vivo
Assays of Cartilage Repair by Perforated Polyurethane Scaffold, Iranian
Polymer Journal 19 (6) 403 -415, 2010.
109. Shahram Rabbani, Abbas Rabbani, Mohammad Ali Mohagheghi, Hamid
Mirzadeh, Saeed Amanpour, Abbas Alibakhshi, Maryam Sotoudeh Anvari and
Yasser Ghazizadeh, A Novel Approach for Repairing of Intestinal Fistula
Using Chitosan Hydrogel, Journal of Biomaterials Applications, 24 ,
545-553, 2010.
110. Hamid Mahdavi, Hamid Mirzadeh, Hamed Hamishehkar, Ahmad
Jamshidi, Amir Fakhari, Jaber Emami, Abdolhossien Najafabadi, Kambiz
Rouholamini Gilani, Mohsen Minaiyan, Mahnaz Najafi, Maryam Tajarod, and
Ali Nokhodchi, The Effect of Process Parameters on the Size and
Morphology of Poly (D,L-Lactide-Co-Glycolide) Micro/Nanoparticles
Prepared by an Oil in Oil Emulsion/Solvent Evaporation Technique,
Journal of Applied polymer science, 116 (1) 528–534, 2010.
111. Kabiri, K., Hamid Mirzadeh and Zohuriaan-Mehr, M. J., Chitosan
Modified MMT-Poly(AMPS) Nanocomposite Hydrogel :Heating Effect on
Swelling and Rheological Behavior, Journal of Applied Polymer Science,
116 (5) 2548-2556, 2010.
112. Jolly C, Garnham C, Hamid Mirzadeh, Truy E, Martini A, Kiefer J
and Braun S., Electrode Features for Hearing Preservation and Drug
Delivery Strategies, Adv Otorhinolaryngol. 67, 28–42, 2010.
113. Zandi M, Hamid Mirzadeh, Mayer C, Urch H, Eslaminejad MB,
Bagheri F and Mivehchi H, Biocompatibility Evaluation of Nano-rod
Hydroxyapatite/Gelatin Coated with Nano-Hap as a Novel Scaffold Using
Mesenchymal Stem Cells, Journal of Biomedical Materials Research Part A,
92 (4), 1244-1255, 2010.
114. K. Kabiri, M. J. Zohuriaan-Mehr, Hamid Mirzadeh and M.
Kheirabadi, Solvent-, ion- and pH- Specific Swelling of
Poly(2-acrylamido-2- methylpropane sulfonic acid ) Superabsorbing Gels,
Journal of Polymer Research, 17 (2) 203-212, 2010.
115. Farahmand Ghavi F, Hamid Mirzadeh, Imani M, Jolly C and Farhadi
M, Corticosteroid Releasing Cochlear Implant: A Novel Hybrid of
Biomaterial and Drug Delivery System, Journal of Biomedical Materials
Research Part B: Applied Biomaterials, 94B (2) 388– 398, 2010.
116. Elmi A, Kajbafzadeh AM, Sadeghi Z, Tanhaeivash R and Hamid
Mirzadeh, Biodegradable Mini Plate and Screw: A Secure Method for
Internal Fixation of Symphysis Pubis in Animal Model of Pubic Diastasis,
Urology, 75 (3) 676-683, 2010.
117. Shokrollahi P, Hamid Mirzadeh, Scherman O and Huck WT.,
Biological and Mechanical Properties of Novel Composites Based on
Supramolecular Polycaprolactone and Functionalized Hydroxyapatite, J
Biomed Mater Res.Part A, 95A (1): 209–221, 2010.
118. Shadab Bagheri-Khoulenjani, Mohammad Etrati-Khosroshahi and
Hamid Mirzadeh, Particle Size and Distribution Modeling of
Nanohydroxyapatite-in-gelatin Nanocomposite Microspheres by Surface
Response Method, Iranian Polymer Journal, 19 (10) 743- 755, 2010.
119. Parvin Shokrollahi, Hamid Mirzadeh, Wilhelm T.S. Huck and Oren
A. Scherman, Effect of Self Complementary Motifs on Phase Compatibility
and Material Properties in Blends of Supramolecular, Polymers, 51,
6303-6312, 2010.
120. Atefeh Solouk, Mehran Solati-Hashjin, Siamak Najarian, Hamid
Mirzadeh and Alexander M Seifalian, Optimization of Acrylic Acid
Grafting onto POSS-PCU Nanocomposite Using Response Surface Methodology,
Iranian Polymer Journal 20 (2), 91-107, 2011.
121. Akbar Karkhaneh, Hamid Mirzadeh, Alireza Ghaffariyeh, Abdolali
Ebrahimi, Nazafarin Honarpisheh, Masud Hosseinzadeh and Mohammad Hossein
Heidari, Novel Materials to Enhance Corneal Epithelial Cell Migration
on Keratoprosthesis, British Journal of Ophthalmology 95(3):405-409,
2011.
122. S. Bagheri-Khoulenjani1, Hamid Mirzadeh, M. Etrati-Khosroshahi,
Chitosan and Nanohydroxyapatite Roles in Physical and Chemical
Characteristics of Gelatin/Chitosan/Nanohydroxyapatite Microspheres,
Iranian Journal of Polymer Science and Technology, 23 (6) 487-498, 2011.
123. Mojtaba Koosha, Yousef Jahani and Hamid Mirzadeh, The Effect of
Electron Beam Irradiation on Dynamic Shear Rheological Behavior of a
Poly (propylene-co-ethylene) Heterophasic Copolymer, Polymers for
Advanced Technologies, 22 (12), 2039-2043, 2011.
124. Atefeh Solouk, Brian Cousins, Hamid Mirzadeh, Mehran
Solati-Hashjin, Siamak Najarian and Alexander Seifalian, , Surface
Modification of POSS-nanocomposite Biomaterials Using Reactive Oxygen
Plasma Treatment for Cardiovascular Surgical Implant Applications,
Biotechnology and Applied Biochemistry, 58 (3) 147–161, 2011.
125. Hamid Mirzadeh, Ehsan Vahedi-Moghadam and Hoori Mivehchi, Laser
Modified Nanostructures of PET Films and Cell Behavior, Journal of
Biomedical Materials Research: Part A, 98A (1) 63–71, 2011.
126. Atefeh Solouk, Hamid Mirzadeh, Mohammad Ali Shokrgozar, Mehran
Solati-Hashjin, Siamak Najarian and Alexander M. Seifalian, The Study of
Collagen Immobilization on a Novel Nanocomposite to Enhance Cell
Adhesion and Growth, Iranian Biomedical Journal, 15 (1 & 2): 6-14
(April & January), 2011.
127. Shokrolahi, Fatameh , Hamid Mirzadeh, Hamid Yeganeh and
Morteza Daliri, Fabrication of Poly(urethane urea)-based Scaffolds for
Bone Tissue Engineering by the Combined Strategy of Using Compression
Moulding and Particulate Leaching Methods, Iranian Polymer Journal, 20,
1-14, 2011.
128. Shokrolahi F, Yeganeh H, Mirzadeh H, Simple and Versatile
Method for One-pot Synthesis of Segmented Poly(urethane urea)s via in
situ Formed AB-type Macromonomers, Polym Int, 60, 620-629, 2011.
129. Atefeh Solouk, Brian Cousins, Hamid Mirzadeh and Alexander
Seifalian, Application of Plasma Surface Modification Techniques to
Improve Haemocompatibility of Vascular Grafts: A Review, Biotechnology
and Applied Biochemistry, 58, (5), 311–327 2011.
130. Shahriar Sharifi, Yousef Shafieyan, Hamid Mirzadeh, Shadab
Bagheri-Khoulenjani, Sayed Mahmood Rabiee, Mohammad Imani, Mohammad
Atai,Mohammad Ali Shokrgozar, Ali Hatampoor, Hydroxyapatite Scaffolds
Infiltrated with Thermally Crosslinked Polycaprolactone Fumarate and
Polycaprolactone Itaconate, Journal of Biomedical Materials Research:
Part A, 98A, 257–267, 2011.
131. Mohammad. Farhadi, Hamid Mirzadeh, Atefeh. Solouk, Alimohamad.
Asghari, Maryam. Jalessi, Hadi. Ghanbari, Parin Yazdanifard
Collagen-Immobilized Patch for Repairing of Small Tympanic Membrane
Perforations: In Vitro and In Vivo Assays, , Journal of Biomedical
Materials Research: Part A, 100A: 549–553, 2012.
132. Mohamad Pezeshki Modaress, Hamid Mirzadeh, Mojgan Zandi,,
Fabrication of a porous wall and higher interconnectivity scaffold
comprising gelatin/chitosan via combination of salt-leaching and
lyophilization methods, Iranian Polymer Journal, 21, 191-200, 2012.
133. Farahmand Farhid, Imani Mohammad, Mirzadeh Hamid, Jolly Claude,
Curing Behavior of Silicone Elastomer in the Presence of Two
Corticosteriod Drugs, Journal of Biomedical Materials research, Part B-
Applied Biomaterials,100B, 1636–1644, 2012.
134. Marzieh Aliaghaie, Hamid Mirzadeh, Erfan Dashtimoghadam and
Shahrouz Taranejoo, Investigation of Gelation Mechanism of an Injectable
Hydrogel Based on Chitosan by Rheological Measurements for a Drug
Delivery Application, Soft Matter, Soft Matter, 8, 7128-7137, 2012.
135. Shadab Bagheri-khoulenjani and Hamid Mirzadeh Polystyrene
surface modification using excimer laser and radio-frequency plasma:
blood compatibility evaluations, Progress in Biomaterials,1 (1), 1-8,
2012.
136. Azadehsadat Hashemi Doulabi, Hamid Mirzadeh, Mohammad Imani,
Nasrin Samadi, Chitosan/Polyethylene Glycol Fumarate Blend Film:
Physical and Antibacterial properties, Carbohydrate Polymers, 92, 48-56,
2013.
137. Farhadi M, Jalessi M, Salehian P, Farahmand Ghavi F, Emamjomeh
H, Mirzadeh H, Imani M, Jolly C., Dexamethasone Eluting Cochlear
Implant: Histological Study in Animal Model, Cochlear Implants
International, 14, 45-50, 2013.
138. Azadehsadat Hashemi Doulabi, Hamid Mirzadeh, Mohammad Imani,
Miscibility Study of Chitosan/Polyethylene Glycol Fumarate Blends in
Dilute Solutions, Journal of Applied Polymer Science, 127, 3514–3521,
2013.
139. Azadehsadat Hashemi Doulabi, Hamid Mirzadeh, Mohammad Imani,
Interaction and Miscibility study of Fumarate-based Macromers with
Chitosan, Materials Chemistry and Physics, 139 515-524, 2013.
140. Shadab Bagheri-Khoulenjani, Hamid Mirzadeh, Particle Size
Modeling and Morphology Study of Chitosan/Gelatin/Nanohydroxyapatite
Nanocomposite Microspheres for Bone Tissue Engineering, Journal of
Biomedical Materials Research, Part A, 101A,(6) 1758–1767, 2013.
141. Erfan Dashtimoghadam, Hamid Mirzadeh, Faramarz Afshar Taromi,
Bo Nyström, Microfluidic Self-Assembly of Polymeric Nanoparticles with
Tunable Compactness for Controlled Drug Delivery, Polymer, 54,
4972–4979, 2013.
ب) مقالات در کنفرانس‌های ملی و بین المللی :
1. Laser Induced Surface Grafting of Aam, HEMA and NVP onto PDMS,
Proceedings of the First International and 8th National Congress of
Chemistry and Chemical Engineering, p.13, Tehran, Iran, Sep. 1993.
2. Laser Grafting of HEMA and NVP onto EPR-II, Proceedings of
RadTech Asia’ 93 Radiation Curing Conference, pp. 661-666, Tokyo, Japan,
10-13 Nov. 1993.
3. Laser Induced Surface Modification of PDMS as a Super-
Hydrophobic Blood Compatible Material, Proceedings of RadTech Asia’ 95
Radiation Curing Conference, pp. 284-289,Guilin, China, 20-24 Nov. 1995.
4. Preparation of a Blood Compatible Silastic Rubber by Laser
Irradiation, Proceedings of the 8th Iranian Conference on Biomedical
Engineering ICBME, Tehran, Iran, pp. 65-74, Dec. 1996.
5. Effect of Laser Repetition Rate on the Surface Morphology of
Polymers, Proceedings of 1st National Seminar on Interaction of Laser
Beams on Polymers, pp. 1-17, Tehran, Iran, 30 Apr.- 1 May 1997.
6. A Review on Laser Induced Polymerization, Proceedings of 1st
National Seminar on Interaction of Laser Beams on Polymers, pp. 55-69,
Tehran, Iran, 30Apr.-1 May 1997.
7. Modification of Polydimethylsiloxane Surface by Graft
Polymerization of Acrylamide by Pulsed Laser Irradiation, Proceedings of
1st National Seminar on Interaction of Laser Beams on Polymers, pp.
107-125, Tehran, Iran, 30 Apr.-1 May 1997.
8. Surface Modification Technologies X, the Institute of Materials,
London. Ed. T. S. Sudarshan, Ed., T.S. Sudarshan, pp 256-264 1997.
9. Laser Structuring to Improve Biocompatibility I: Surface
Morphological Modification, Proceedings of the International Seminar on
Polymer Science and Technology’ 97, pp.764- 769, Tehran, Iran, 3-5 Nov.
1997.
10. Modification of Polydimethylsiloxane Surface by Graft
Polymerization of Acrylamide with Pulsed Laser, Proceedings of the
International Seminar on Polymer Science and Technology’97, pp.113-117,
Tehran, Iran, 3-5 Nov. 1997.
11. IR Laser Surface Modification of Polyethylene Terephthalate as
Biomaterial, Proceedings of Processing and Fabrication of Advanced
Materials VIII, pp., 221-229, Sep. 8-10, 1999.
12. Determination of Crosslinking Density of Polydimethylsiloxane
Network by Calorimetry, Proceedings of the 5th International Seminar on
Polymer Science & Technology, p.402, Tehran, Iran, Sep. 2000.
13. Synthesis Evaluation of Reactive-Urethane Prepolymer as
Bioadhesive, Proceedings of the 5th International Seminar on Polymer
Science & Technology, p.367, Tehran , Iran, Sep. 2000.
14. Cell Growth on the Laser Induced Acrylamide Grafted Polyethylene
Terephthalate Film, Proceedings of the International Symposium on
Polymeric Biomaterials and DDS, p. 73, Cheju, Korea, , Aug. 2000.
15. Platelet Adhesion and Cell Growth on the Laser Surface Modified
Polyethylene Terephthalate, Proceedings of the International Conference
on Radiation and its Role on Diagnosis and Health, p.78, Tehran, Iran
18-20 Oct. 2000.
16. Design and Manufacturing of an Elastomeric Blend Based on
PDMS/EPR as Insulating Composite, Proceedings of the 15 th International
Power System Conference (PSC), pp. 211-222,Tehran, Iran, 6-8 Nov. 2000.
17. Self Curving of Electrode Array by Polymer Surface Modification,
Proceedings of the 6 th International Conference on Tactile Aids,
Hearing Aids and Cochlear Implants, University of Exeter, Exeter, U.K,
pp. 61-64, May 2000.
18. Platelet Adhesion Study onto Three Different Types of
Polydimethylsiloxane, Proceedings of the 5th International Seminar on
Polymer Science & Technology, p.359, Tehran, Iran, Sep. 2000.
19. Biocompatibility Evaluation of Hydrophilic and Hydrophobic
Silicone Rubbers, Proceedings of the 5th International Seminar on
Polymer Science & Technology, p.339, Tehran, Iran, Sep. 2000.
20. Cell Behaviour Studies on the Excimer and CO2 Laser Surface
Modified Polyethylene Terephtalate, Proceedings of the 14th
International Conference on Surface Modification Technologies, Paris,
France 11-13 Sep. 2000.
21. Bulk and Surface Modification of Silicon Rubber for Biomedical
Applications, Proceedings of PPS 2001 , Antalya , Turkey , 22-24 Oct.
2001.
22. Radiation –Induced Surface Modification of Silicone Rubber and
its Application in Cochlear Implant Systems, Proceedings of the 8th
Symposium, Cochlear Implant in Children, p. 61, Universal City Hilton
and Towers CA, USA, Feb.-Mar. 2001.
23. Evaluation of the Polarity and Frictional Properties of
Solid-Solid and Solid-Liquid on RTV Silicone Blend with Polyacrylic Acid
as Superabsorbant, Proceedings of 6th National Congress on Chemical
Engineering, pp. 97-104, Isfahan, Iran, 8-11 May 2001.
24. Conversion process of Natural Gas to Ethylene, Proceedings of
3rd Iran Petrochemical Forum (IPF) pp. 245-258, Tehran, Iran,5-6 May
2001.
25. "In vivo Study of Microcrystalline Chitosan as a Blood
Hemostasis Agent, International Conference on Materials for Advanced
Technologies (ICMAT 2001) Symposium B Biomaterials and Tissue
Engineering, p.11, Singapore, 1-6 Jul. 2001.
26. Laser Induced Surface Modification of Polydimethylsiloxane
(PDMS) to Produce Three Different Types of Surfaces for Biomedical
applications. Proceedings of RadTech Asia 2001 pp 471-478, Kunming,
China, 15-19 May 2001.
27. Manufacturing of Vascular Prosthesis Using Graphite Composites
1: Coating Technique of Vascular Prosthesis with Graphite, Proceedings
of 10th Iranian Conference of Biomedical Engineering, pp. 1-7, Tehran,
Iran, 31 Oct. 2001.
28. Ultra High Molecular Weight Polyethylene (UHMWPE) and
Polydimethylsiloxane (PDMS) Blends as Acetabular Cup Shock Absorber,
Proceedings of 10th Iranian Conference of Biomedical Engineering, p. 47,
Tehran, Iran, 31 Oct. 2001.
29. Increase in Surface Polarity of a Buffer-Rinsed Biocomposite
upon Prolongation of Rinse Time, Proceedings of 10th Iranian Conference
of Biomedical Engineering, p 51, Tehran, Iran, 31 Oct. 2001.
30. Adhesion Study of BHK Cells to the CO2 Pulsed Laser Treated PDMS
Surfaces, in vitro Assay, Proceedings of the First National Conference
on Lasers in Medicine and Biomedical Engineering, Tehran, Iran, pp.
27-36, 1-2 May 2002.
31. Self- Positioning Segmented for Close Hugging of Modiolus,
Proceedings of the First International Symposium on Cochlear Implant and
Related Sciences, p. 42, Tehran, Iran 25-27 Apr. 2002.
32. Application of Laser – Induced Polymerization in Modern
Electrodes for Cochlear Implants, Proceedings of the First National
Conference on Lasers in Medicine and Biomedical Engineering, pp.
110-117, Tehran, Iran, 1-2 May 2002.
33. Cartilage Tissue Engineering for Ear Using Perforated
Polyurethane Prosthesis, The International Journal of Artificial Organs,
The Congress Issue, Vol. 25, No. 7, p. 680, 2002, the XXX ESAO
Congress, Vienna, Austria, 28-31 Aug. 2002.
34. Effect of Polyvinyl Pyrrolidone (PVP) on the Polyether Sulfone
(PES) Flat Sheet Hemodialysis Membrane, Proceedings of the 7th National
Iranian Chemical Engineering Conference, 1, pp. 134-139, Tehran, Iran,
28-31 Oct. 2002.
35. Wettability Reduction of Silicone Rubber by Increasing surface
porosity, Proceedings of the 1st National Conference on Polymer
–Modified Bitumen and Their Applications, Tehran, Iran, 16-17 Dec. 2002.
36. Experimental Kinetic Model of Oxidative Coupling of Methane
Under Different Operation Condition Over Perovskite Catalyst,
Proceedings of 12th Oil, Gas and Petrochemical Congress (Gas
Conversion), International, Tehran, Iran, 23-24 Feb. 2003.
37. Poly (vinyl alcohol)/ Chitosan Blend Film as a Biomaterial
Proceedings of the 6th Iranian Seminar on Polymer Science and Technology
(ISPST), p.158, Tehran, Iran, 12-15 May 2003.
38. A New Technique to Increase Chitin Deacetylation by Multistage
Alkali Treatments, Proceedings of the 6th Iranian Seminar on Polymer
Science and Technology (ISPST), p. 168, Tehran, Iran, 12-15 May 2003.
39. Formulation of Polyisobutylene Based Adhesive for Wound Dressing
Proceedings of the 6th Iranian Seminar on Polymer Science and
Technology (ISPST), p. 325, Tehran, Iran, 12-15 May 2003.
40. Preparation of Porous Polyethylene for Maxillofacial Surgery
Purposes: in vitro Proceedings of the 6th Iranian Seminar on Polymer
Science and Technology (ISPST) p.166, Tehran, Iran, 12-15 May 2003.
41. Effect of Surface Treatment of Polyester Vascular Grafts with
Polyethylene- Imine on its Adhesion to Graphite, Proceedings of the 6th
Iranian Seminar on Polymer Science and Technology (ISPST), p.164,
Tehran, Iran, 12-15 May 2003.
42. Adhesion of modified to unmodified PDMS layers and its
applications in modern prosthesis, Proceedings of the 6th Iranian
Seminar on Polymer Science and Technology (ISPST), p.167, Tehran, Iran,
12-15 May 2003.
43. Ultrasound Gel Pad Produced by Freezing/Thawing of PVA/Water
Solution Proceedings of the 6th Iranian Seminar on Polymer Science and
Technology (ISPST), p.118, Tehran, Iran, 12-15 May 2003.
44. Manufacturing and evaluation of silicone-EPDM blends used in
housing of high voltage composite insulators, Proceedings of the 17th
International Conference and Exhibition on Electricity Distribution (
CIRED), Barcelona, Spain 12-15 May 2003.
45. Comparative Study of Home Made Tube Grafts (GCPVG) and Gel-
Sealed Type, Proceedings of the Third Iranian Society for Cardiac
Surgery (ISCS), Oral- 15 ,Tehran, Iran, 23-26-Sep.-2003.
46. Effectiveness of Persian Gulf Chitosan (PGC) Application for
Sealing Arterial puncture Sites, Proceedings of the Third Congress of
Iranian Society of Cardiac Surgeons, Oral -25, Tehran, Iran , 23-26 Sep.
2003.
47. In vitro and in vivo Hemocompatibility Evaluation of Graphite
Coated Polyester Vascular Grafts,The International Journal of Artificial
Organs, The Congress Issue, Vol. 26, No. 7, p.592, 2003, the XXX ESAO
Congress, Aachen, Germany 3-6 Sep. 2003.
48. Biocompatibility Evaluation of Graphite Coated Polyester
Vascular Grafts , In vitro Assay, Proceedings of Chemical Engineering
Congress , The Eight Iranian National, p 98, Mashhad, Iran, 21-23 Oct.
2003.
49. Characterization of Heat Treated PES-PVP Hemodialysis Membrane
by Ultrafiltration and Atomic Force Microscopy, Proceedings of the
Fifth International Membrane Science and Technology, pp 25-30, Sydney ,
Australia, 10-14 Nov.2003.
50. Preparation and Evaluation of Physical Properties of the Wound
Healer Based on Polyisopropylene, Proceedings of the 11th Iranian
Conference on Biomedical Engineering (ICBME04), pp. 229-234 Tehran,
Iran, 17-18 Feb. 2004.
51. Evaluation of E- Coli Adhesion onto KrF and CO2 Laser- Treated
PET: in vitro, Proceedings of the 11th Iranian Conference on Biomedical
Engineering (ICBME04),pp. 137-143, Tehran, Iran, 17-18 Feb. 2004.
52. Evaluation of Hemocompatibility of Graphite Coated Polyester
Fabric Vascular Prosthesis, in vitro & in vivo Assays, Proceedings
of the 7th World Biomaterials Congress , p.1706, Sydney, Australia,17-21
May 2004.
53. A Novel Artificial Skin Based on Chitosan (Cs) / Gelatin (Gel)/
Poly (vinyl alcohol) (PVA) Composite Membrane, Proceedings of the 7th
World Biomaterials Congress ,p.410, Sydney, Australia,17-21 May 2004.
54. Chitosan Powder as a Sealant for Uncontrolled Surgical Bleeding ,
Proceedings of the 3rd EACTS/ESTS Joint Meeting Leipzig Germany-
September 12, 2004.
55. Evaluation of Cardiac Adhesions After Pericardial
Substitution by Laser –Treated Silicone (LTS) Membrane , The Congress
Issue, Vol. 27, No. 7, p. 568, 2004, the XXXI ESAO Congress, Warsaw,
Poland 8-11 Sep. 2004.
56. Biocompatibility Evaluation of Biodegradable Perforated
Polyurethane (BPP) Scaffolds for Repairing Chondral Defects, The
Congress Issue, Vol. 27, No. 7, p. 580, 2004, the XXXI ESAO Congress,
Warsaw, Poland 8-11 Sep. 2004.
57. Effect of Preparation Temperature on Morphology and Performance
of hemodialysis Membranes manufactured from polyether sulfone (PES) and
polyvinylpyrrolidone (PVP) ,Proceddings of the Euromembrane 2004 , p
383, Hamburg, Germany, 28Sep.- 1Oct.2004 .
58. Modification of Silicone Rubber for Application in New
Intra-Cochlear Electrodes, Proceedings of the World Polymer Congress,
Macro 2004, Session 5.3.1,Paris, France, 4-9 Jul. 2004.
59. A study on the Effect of Molecular Mobility of PDMS on Cell
Growth, Proceedings of the World Polymer Congress, Macro 2004, Session
5.3.5,Paris, France, 4-9 Jul. 2004.
60. A Thermomechanical Method to Prepare Porous HDPE for
Reconstructive Surgery Applications and In Vivo Study of the Product,
Proceedings of the World Polymer Congress, Macro 2004, Session
5.3.5,Paris, France, 4-9 Jul. 2004.
61. Evaluation of Biocompatibility of Graphite Coated Polyester
Fabric Vascular Prosthesis, Proceedings of the World Polymer Congress,
Macro 2004, Session 5.3.5, Paris, France, 4-9 Jul. 2004.
62. Levonorgestrel Release from an In Situ Forming drug Delivery
System, Proceddings of the 4th International Symposium on Pharmaceutics,
p.34, Istanbul- Turkey, 20-22 Sep. 2004 .
63. Effect of Polyvinylpyrrolidone on Morphology and Support Layer
of Hemodialysis Membrane Prepared from Polytether Sulfone, Proceedings
of the 9th National Congress on Chemical Engineering (IchEC9), pp.
3793-3801, Tehran, Iran, 22-25 Nov. 2004.
64. Novel Theory for Glaucoma Treatment , Proceedings of the 14th
Iranian Congress of Ophthalmology, p.129, Tehran, Iran, 14-17 Dec. 2004.
65. Biodegradable Hybrid Scaffolds with Interconnected Networks for
Bone Tissue Engineering, Proceedings of the 7th International Seminar on
Polymer Science and Technology (ISPST 2005), p. 109, Tehran, Iran,
27-29 Sep. 2005.
66. Synthesis and Characterization of In situ Crosslinkable PEG –
Diacrylate Hydrogels, Proceedings of the 7th International Seminar on
Polymer Science and Technology (ISPST 2005), p. 108, Tehran, Iran, 27-29
Sep. 2005.
67. Evaluation of Effectiveness of Chitosan Hydrogel to Prevent
Bleeding and Air Leakage of Lung Fistula, Proceedings of the 7th
International Seminar on Polymer Science and Technology (ISPST 2005), p.
250, Tehran, Iran, 27-29 Sep. 2005.
68. Impact Resistant Polymer at Ultra Low Temperature for Medical
Applications, Proceedings of the 7th International Seminar on Polymer
Science and Technology (ISPST 2005), p. 112, Tehran, Iran, 27-29 Sep.
2005.
69. Biologically Surface Modification of Silicone Laser Grafted
Polyacrylic Acid Using Collagen : in vitro, Proceedings of the 7th
International Seminar on Polymer Science and Technology (ISPST 2005), p.
109, Tehran, Iran, 27-29 Sep. 2005.
70. Dynamic Oscillatory Rheology of Gelatin Solution in Different
Temperatures, Proceedings of the 7th International Seminar on Polymer
Science and Technology (ISPST 2005), p. 250, Tehran, Iran, 27-29 Sep.
2005.
71. Plasma –Induced Graft Polymerization of Acrylamide onto Silicone
Rubber, Proceedings of the 7th International Seminar on Polymer Science
and Technology (ISPST 2005), p. 253, Tehran, Iran, 27-29 Sep. 2005.
72. Design and Preparation of a Biodegradable Hybrid Scaffolds for
Bone Tissue Engineering, Proceedings of the 12th Iranian Conference of
Biomedical Engineering,pp.938-946, (ICBME2005) Tabriz, Iran, 16-18 Nov.
2005.
73. Correlation between Zeta Potential of Plasma Irradiated PDMS
Surfaces and their Biocompatibility, Proceedings of the 10th
International Conference on Radiation Curing (Rad Tech Asia’2005), pp.
639-634, Shanghai, China , 23-26 May, 2005.
74. Polyethersulfone/ Polyvinylpyrrolidone Hollow Fiber Membranes
for Hemodialysis Application, Proceedings of the 7th International
Seminar on Polymer Science and Technology (ISPST 2005), p. 130, Tehran,
Iran, 27-29 Sep. 2005.
75. Chitosan/ Gelatin/β-TCP Materials as Potential Tissue
Engineering Orthopedic Substitutes, Proceedings of the 7th International
Seminar on Polymer Science and Technology (ISPST 2005), p. 251, Tehran,
Iran, 27-29 Sep. 2005.
76. Characterization and Cytotoxicity Evaluation of Biodegradable
Polyurethane Scaffolds Based on HMDI, PCL and BD/HMDI/BD, Proceedings of
the 7th International Seminar on Polymer Science and Technology (ISPST
2005), p. 110, Tehran, Iran, 27-29 Sep. 2005.
77. Evaluation of Homemade Graphite Coated Polyester Fabric Vascular
Prosthesis ,In Vivo assays , Proceedings of the 7th National Congress
on Cardiovascular Update, pp. 22-23 Tehran, Iran, 17-20 Jun. 2005.
78. Hollow Fiber Membranes Prepared from Polyethersulfone and
Polyvinylpyrrolidone for Hemodialysis Application, Proceedings of the
5th CITEM 2005, 5th Ibero American Congress on Membrane Science and
Technology, P1.26, Valencia, Spain, 6-8 Jul. 2005.
79. Effect of hydrostatic Pressure on Chondrocytes Metabolism on
Biodegradable Degrapol Scaffold: A Useful Method for Articular Cartilage
Tissue Engineering, Proceedings of the 7th International Seminar on
Polymer Science and Technology (ISPST 2005), p. 251, Tehran, Iran, 27-29
Sep. 2005.
80. Levonorgestrel Release from an in situ Forming Drug Delivery
System, Proceedings of the 7th International Seminar on Polymer Science
and Technology (ISPST 2005), p. 253, Tehran, Iran, 27-29 Sep. 2005.
81. A Comparison between Cell Viability of Chondrocytes on
Biodegradable Degrapol Scaffold and Alginate Beads in Different Oxygen
Condition, Proceedings of the 7th International Seminar on Polymer
Science and Technology (ISPST 2005), p. 255, Tehran, Iran, 27-29 Sep.
2005.
82. Synthesis of Medium Chain Length Polyhydroxyalkanoate (MCLPHA)
by a Native PseudomonasStrain , Proceedings of the 7th International
Seminar on Polymer Science and Technology (ISPST 2005), p. 259, Tehran,
Iran, 27-29 Sep. 2005.
83. A Novel Biodegradable Orthopedic Tissue Engineering Scaffold
Comprising PLGA, β-TCP, Chitosan and Gelatin, Proceedings of the 4th
Annual Meeting of the European Tissue Engineering Society Munich,
Germany, Aug.31st –Sep.3rd, 2005 .
84. Preparation and Modification of Polyethersulfone – Polyvinyl
pyrrolidone Hollow Fiber Membranes for Hemodialysis, Proceedings of the
10th National Chemical Engineering Conference, Zahedan, Iran, 2005.
85. Biodegradable Hybrid Scaffolds with Interconnected Networks for
Bone Tissue Engineering, The International Journal of Artificial Organs,
XXXII ESAO Congress, Congress Issue (Vol. 28, No. 9 – 2005, p. 889)
Bologna, Italy, 5-8 Oct. 2005.
86. Bone Tissue Engineering: Combination of Mesenchymal Stem Cells
(M.SC.s) and Novel 3D Alginate /Gelatin /β-TCP Hybrid Scaffolds, The
International Journal of Artificial Organs, XXXII ESAO Congress,
Congress Issue (Vol. 28, No. 9 – 2005, p. 888) Bologna, Italy, 5-8 Oct.
2005.
87. Evaluation of Hydrostatic Pressure on Chodrocytes Metabolism on a
Biodegradable Polyurethane Scaffold, The International Journal of
Artificial Organs, XXXII ESAO Congress, Congress Issue (Vol. 28, No. 9 –
2005, p. 889) Bologna, Italy, 5-8 Oct. 2005.
88. Evaluation of Controlled Release of β-Methazone Sodium Acetate
from Injectable Implant Delivery System Using HPLC, Proceedings of the
12th Iranian Conference on Biomedical Engineering (ICBME2005) ,pp.
906-914, Tabriz, Iran, 16-18 Nov. 2005.
89. Evaluation of 3D Porous PLGA/Gelatin/β-TCP Composite as a
Scaffold for Osteogenic Differentiation of Mesenchymal Stem Cells ,
Proceedings of the 12th International Conference on Biomedical
Engineering ( IFMBE Proceedings), p.105, Singapore, 7-10 Dec. 2005 .
90. Stem Cell Engineering: Combination of Cord Blood Mesenchymal
Stem Cells (MSCs) and 3D Alginate /Gelatin/β-TCP Scaffolds, Proceedings
of the 12th International Conference on Biomedical Engineering,(IFMBE
Proceedings), p.193, Singapore, 7-10 Dec. 2005.
91. Photopolymerization, Shrinkage Characterization and In vitro
Cytotoxcity Evaluation of Injectable, Poly (ε-Caprolactone Fumarate) /
Vinyl Pyrrolidone Biomaterials, Proceedings of the 20th European
Conference on Biomaterials , ESB 2006, Nantes, France September 27 –
October 1, 2006.
92. Synthesis and Characterization of Photocureable Poly
(ε-Caprolactone Fumarate) /N-Vinyl Pyrrolidone Networks: Cure Kinetics
and MTT Cytotoxicity Evaluation, Proceedings of the 20th European
Conference on Biomaterials ESB 2006, Nantes, France ,September 27 –
October 1, 2006.
93. Synthesis and Characterization of Novel Injectable,
Biodegradable and In-situ Crosslinkable
Poly(hexamethylenecarbonate-fumarate),Poly (hexamethylene
carbonateacrylate) and Poly(ethylene glycol fumarate-co-
hexamethylenecarbonate-fumarate) Scaffolds for Bone Tissue Engineering,
IEEE 2006, Proceedings 0f the 28th Annual International Conference of
the IEEE Engineering in Medicine and Biology Society ,pp. 791-794, New
York, Aug 30.- Sep.3 , 2006.
94. Modification the Properties of Cotton –Cellulose by Radiation
Grafting : A Comparison of Pre-irradiation and Simultaneous Grafting ,
Proceedings of the 11th Tihany Symposium on Radiation Chemistry, p.84,
26-31 August, Eger Hungary, 2006.
95. Comparison of the Effect of Excimer Laser Irradiation and RF
Plasma Treatment on Polystyrene Surface: in vitro Assays, Proceedings
of the 11th Tihany Symposium on Radiation Chemistry, p.32, 26-31
August, Eger Hungary, 2006 .
96. Effect of Temperature and pH on Early Stages of Gelatin
Solution, International Society European Chapter Meeting 2006,
Rotterdam, The Netherlands, October 8-11, 2006.
97. Early Stages of Gelation Solution, Polymer in Pharmacy, Halle/Saale (Germany), September 24-26, 2006.
98. Novel Theory for Glaucoma Treatment (PAD): Polymer-Assisted
Dilatation of Schlemm’s Canal, XXIV Congress of the ESCRS LONDON, 9-13
September, 2006.
99. Tissue Engineering Using Biodegradable Polymers, Yakhteh Medical Journal, 8, 11-17 Sep. 2, 2007.
100. Plasma Modification of Amorphous Poly (D, L lactic acid) Film
surface for nerve tissue Regeneration, Yakhteh Medical Journal, 8, 1-5,
Sep. 2, 2007.
101. Chemical Modification of Chitosan to Improve Bioadhesion
Properties of its Hydrogels, Proceedings of ISPST 2007,p.93, Tehran.,
Iran, 23-25 Oct. 2007 .
102. Gamma irradiation effects on the release of betamethasone from
the biodegradable in situ forming systems, Proceedings of ISPST 2007,
p.81, Tehran., Iran, 23-25 Oct. 2007.
103. Two-step Plasma Surface Modification of PDMS with Mixture of
HEMA and Aac: Collagen Immobilization and in vitro and in vivo Assays,
Proceedings of the Fifth IASTED International Conference on Biomedical
Engineering ~BioMED 2007~, pp.433-438 , Innsbruck, Austria, February 14
– 16, 2007.
104. Studying the Effect of Molecular Weight on Enzymatic
Degradation of Chitosan, Proceedings of ISPST 2007, p. 111, Tehran.,
Iran, 23-25 Oct. 2007.
105. Characterization of Charged Hydrogels for Nerve Regeneration,
Proceedings of CRS 2007/ 20 for the 34th Annual Meeting &
Exposition in Long Beach, California, July 7-11, 2007.
106. Evaluation of Photo-crosslinked Polycaprolactone Diacylate and
Polycarbonate Diacrylate Biomaterials, Proceedings of ESB 2007, The
Dome, Brighton East Sussex, UK 9-13th September 2007.
107. Development of Poly(ethylene glycol fumarate)/N-Vinyl
Pyrollidone Based Networks as In situ Forming Drug Delivery Devices,
Proceedings of ESB 2007, The Dome, Brighton East Sussex, UK 9-13th
September 2007.
108. A New Method for Synthesis of Biodegradable
Poly(urethane-urea)s Biomaterial, Proceedings of ESB 2007, The Dome,
Brighton East Sussex, UK 9-13th September 2007.
109. Differentiation of Mouse Embryonic Stem Cells into Neural Cells
on PLLA Scaffold, Proceedings of ESB 2007, The Dome, Brighton East
Sussex, UK 9-13th September 2007.
110. Analysis of Distribution of N vinyl pyrrolidone Between
Crosslinked Poly (ε-caprolactone fumarate) and polyvinyl pyrrolidone In
In situ Crosslinkabe Tissue Engineering Scaffolds, Proceedings of ESB
2007, The Dome, Brighton East Sussex, UK 9-13th September 2007.
111. Preparation of a Novel Photocrosslinkable and Injectable
Polycarbonate Based Macromers And Their Amphiphilic Copolymers For Hard
Tissue Engineering Applications, Proceedings of ESB 2007, The Dome,
Brighton East Sussex, UK 9-13th September 2007.
112. Synthesis of Poly (ε-Caprolactone Fumarate) as an Injectable
Drug Delivery System by Acrylation of Polycaprolactone Diol Using a
Novel Proton Scavenger, Proceedings of 7th International Symposium on
Frontiers in Biomedical Polymers,087, Ghent- Belgium, 24-27 June 2007.
113. Synthesis and Preparation of Biodegradable and Visible Light
Crosslinkable Poly (ethylene glycol fumarate)/N-Vinyl Pyrollidone
Networks for Biomedical Applications: In Vitro Drug Release and
Biocompatibility Evaluation, Proceedings of ESB 2007, The Dome,
Brighton East Sussex, UK 9-13th September 2007.
114. In situ Forming Visible Light Photo Crosslinkable Devices for
Tamoxifen Citrate Delivery: In vitro Release Study 3rd Iranian
Conference of Novel Drug Delivery Systems, O-4, Tehran – Iran, 21–22
June, 2007.
115. 114- Fabrication of Highly Porous Scaffolds via Thermally
Induced Phase Separation from Poly (D, L lactic acid) for Nerve Tissue
Engineering, Proceedings of ISPST 2007,p.87, Tehran., Iran, 23-25 Oct.
2007.
116. Injectable, Biodegradable Poly (DL-lactide-co-glycolide)
Carboxyl Terminated for Cartilage Tissue Engineering: in vivo, The
International Journal of Artificial Organs, 30, No. 8, p. 730, August
2007, Abstracts of the XXXIV ESAO Congress, Krems-Austria, 5-8 Sep.
2007.
117. Particle Size Design of PLGA Microspheres for Potential
Pulmonary Drug Delivery: Mathematical Modeling Using Response Surface
Methodology, Respiratory Drug Delivery Europe 2007, Paris, France April
17-20, 2007.
118. Novel theory for glaucoma treatment (PAD): Polymer-assisted
dilatation of Schlemm’s can, Proceedings of 2007 ISRS/AAO Beijing
Meeting, China, May 25 – 27, 2007.
119. Biodegradable and In situ Forming Hydrogel Drug Delivery System
Based on Unsaturated Poly(ethylene glycol) Block Copolymers for
Tamoxifen Citrate Delivery, Proceedings of CRS 2007/298 for the 34th
Annual Meeting & Exposition in Long Beach, California, July 7-11,
2007.
120. Influence of Poly (lactidecoglycolide) Type and Gamma
Irradiation on the Betamethasone Acetate Release from in situ Forming
System Proceedings of CRS 2007/ 529 for the 34th Annual Meeting &
Exposition in Long Beach, California, July 7-11, 2007.
121. Collagen Immobilization onto HEMA grafted PDMS using Plasma to
Enhance Epitheial cell attachment for corneal applications: In vitro and
In vivo assays, The International Journal of Artificial Organs, 30, No.
8, p. 706, August 2007, Abstracts of the XXXIV ESAO Congress,
Krems-Austria, 5-8 Sep. 2007.
122. Porous Poly (L-Lactide Acid)/Hydroxyapatite Rods Nanocomposite
Scaffold for Bone Tissue Engineering, The International Journal of
Artificial Organs, 30, No. 8, p. 713, August 2007 , Abstracts of the
XXXIV ESAO Congress , Krems-Austria, 5-8 Sep. 2007.
123. Spin-lattice Relaxation Study of Aminoacids in Early Stages,
Proceedings of the International Congress in Biohydrogels, Viareggio,
Italy, November 14-18, 2007.
124. Fabrication and Properties of Biodegradable Poly (urethane
urea) Scaffold for Bone Tissue Engineering, Proceedings of the ICNP2007,
Beijing, China, 16-19 Oct. 2007.
125. Biocompatibility and Blood Compatibility Enhancement of
Polystyrene by Plasma Surface Modification, Proceedings of ISPST
2007,p.82, Tehran., Iran, 23-25 Oct. 2007 .
126. Correlation Between Theoretical Phase Diagram and Membrane
Morphology for Water/Solvent/Polyethersulfone Systems, Proceedings of
ISPST 2007,p.133, Tehran., Iran, 23-25 Oct. 2007.
127. The Investigation on Miscibility of Acrylic /Poly
(vinylpyrrolidone) Blends, Proceedings of ISPST 2007, p.71, Tehran.,
Iran, 23-25 Oct. 2007.
128. Adhesion properties of Acrylic/ Poly(vinylpyrrolidone) Pressure
Sensitive Adhesive blends, Proceedings of ISPST 2007,p.70, Tehran.,
Iran, 23-25 Oct. 2007
129. Accelerated Preparation of Bio-Modified Clay: Chitosan
Intercalated Bentonite, Proceedings of ISPST 2007, p.249, Tehran., Iran,
23-25 Oct. 2007.
130. Fabrication and characterization of Poly(L-lactic acid) Hap
Nanocomposite Scaffold for Bone Tissue Engineering, Proceedings of ISPST
2007,p.261, Tehran., Iran, 23-25 Oct. 2007 .
131. Modification Hemodialysis Hollow Fiber Membranes Prepared from
Polyethersulfone and Polyvinyl Pyrrolidone , Proceedings of the 6th
International Membrane Science and Technology Conference, Sydney,
Australia, 5-9 Nov. 2007.
132. Biocompatible and Biodegradable Polymeric Scaffolds for Tissue
Engineering , Proceedings of Biomaterials Iran’s 1st Internatinal
Conference, p.11, Tehran, Iran, 12-15 Nov. 2007
133. Preparation of New Injectable Bioadhesive Hydrogels Based on
Chemically Modified Chitosan, Proceedings of Biomaterials Iran’s 1st
International Conference, p.124, Tehran, Iran, 12-15 Nov. 2007.
134. Spin-lattice Relaxation Study of Aminoacids in Early Stages of
Gelatin Gelation, Proceedings of the International Conference on
Biohydrogels, page 74, VIAREGGIO (Lucca, Italy), 14-18 Nov. 2007.
135. Effect of Hydroxyapatite Nanoparticles on Spin-Spin Relaxation
Times of Aminoacids in Early Stages of Gelatin Gelation, Proceedings of
the 2nd Conference on Nanostructures (NS2008) pp. 302-303, Kish
University, Kish Island, Iran 11-14 March 2008.
136. Processing of SR /HA and SR/β-TCP Composite for Fabricating
Acetabular Cup in Hip Joint and Evaluation of biocompatibility,: in
vitro Proceedings of 14th Iranian Conference on Biomedical Engineering, (
ICBME 2008), Tehran, Iran, 13-14 Feb. 2008.
137. Nano-structure Induction and Blood Compatibility Improvement of
Polystyrene Surface by ArF Laser Irradiation, Proceedings of the 8th
World Biomaterials Congress, 2524, Amsterdam RAI, the Netherlands, 28
May – 1 June 2008.
138. Study of Porous Nano Hydroxyapatite /Gelatin Scaffold Coated
with Nano Hap, Proceedings of the 8th World Biomaterials Congress, 2525,
Amsterdam RAI, the Netherlands, 28 May – 1 June 2008.
139. Evaluation of Cell Behavior on the Surface of HEMA/Aac-Collagen
Immobilized PDMS by Plasma Treatment, Proceedings of the 8th World
Biomaterials Congress, 2070, Amsterdam RAI, the Netherlands, 28 May – 1
June 2008.
140. Corneal Epithelial Layer Formation on the Molecular Engineered
Silicone Surface as a New Artificial Cornea, Proceedings of the 8th
World Biomaterials Congress, 377, Amsterdam RAI, the Netherlands, 28 May
– 1 June 2008.
141. Preparation and Characterization of Novel Surface Modified
Porous Hydroxy Apatite/Poly (caprolactone itaconate) Composite
Biomaterial, Proceedings of the 8th World Biomaterials Congress, 2533,
Amsterdam RAI, the Netherlands, 28 May – 1 June 2008.
142. Preparation of Injectable Poly (ethyleglycole Itaconate)-
Condrotin Sulfate Hydrogels for Articular Cartilage Engineering,
Proceedings of the 8th World Biomaterials Congress, 434, Amsterdam RAI,
the Netherlands, 28 May – 1 June 2008.
143. Injectable Drug Delivery System Based on Novel Poly (hexa
methylene carbonate fumarate) Containing Anti Cancer Drug, Proceedings
of the 8th World Biomaterials Congress, 378, Amsterdam RAI, the
Netherlands, 28 May – 1 June 2008.
144. Semi- chronic Application of Dexamethasone and other Drugs
During and After Cochlear – implantation, Proceedings of 45th Inner Ear
Biology Workshop, p. 59, Ferrara, Italy, Sep. 21- 24, 2008.
145. Application of drugs to the Inner Ear : Techniques, Drugs, and
Results, Proceedings of Hearing Preservation Workshop VII ,
University of Kansas, p. 41, Kansas City, Kansas, USA, Oct. 16-19, 2008.
146. Effects of nanohydroxyappatite on poly(lactide-co-glycolide)
degradation as an in-situ forming implant; Proceedings of the 35th
Annual Meeting & Exposition of the Controlled Release Society, p.
707, Hilton , New York, NY USA, July 12- 16, 2008.
147. Characterization of Mixed Poly( lactide-co- glycolide)
Injectable Implant for the Three Months Controlled Release of Leuprolide
Acetate, Proceedings of 6th World Meeting on Pharmaceutics,
Biopharmaceutics and Pharmaceutical Technologym Spain 7- 10 April 2008.
148. A New Calcification of Resistance, Biostable, Biocompatible
POSS – nanocomposite Polymer for developing New generation of Heart
Valves, Proceedings of International Society for Applied Cardiovascular
Biology ( ISACB), ISACB’s 11th Biennial Meeting in Bordeaux, France,
Sept. 17-20, 2008 .
149. Tubular Scaffold Design of Polylactide Acid for Nerve Tissue
Engineering: In – vitro, Proceeding of the 4th European Congress for
Medical and Biomedical Engineering 2008, Antwerp, 23-27 Nov., 2008.
150. Modeling of Bethamethasone Release Profiles From in situ
Forming Systems Based on PLGA, CRS Transactions 2009, the 36th Annual
Meeting & Exposition of the Controlled Release Society in
Copenhagen. , Bella Center, Copenhagen, Denmark, July 18-22, 2009.
151. Evaluation of Wistar Rats Mesenchymal Stem Cells Response to
Novel Gelatin Scaffold Coated with Nano Rod HAP, The International
Journal of Artificial Organs, 32, No.7, p. 417, July 2009, Abstracts of
the XXXVI ESAO Congress, Compiegne- France, 2-5 Sep. 2009.
152. Investigation on a Novel Injectable Nano-composite Containing
Erythropoietin for Bone Tissue Engineering, The International Journal
of Artificial Organs, 32, No.7, p. 453, July 2009 , Abstracts of the
XXXVI ESAO Congress , Compiegne- France, 2-5 Sep. 2009.
153. Kinetics of curing for a silicone-based drug delivery system:
Counter effects of curing system and drug, Proceedings of ISPST 2009,
A-10-228-1, Tehran, Iran, 17-21 Oct. 2009.
154. Drug Eluting Cochlear Implant Coatings based on Silicone
Rubber: Mixing Optimization & Biological Evaluations, Proceedings of
ISPST 2009, A-10- 228-2, Tehran, Iran, 17-21 Oct. 2009.
155. Drug Eluting Cochlear Implant Coating: An Animal Model Study,
Proceedings of ISPST 2009, A-10- 228-3, Tehran, Iran, 17-21 Oct. 2009.
156. A Preliminary Study on Composite Preparation from
Supramolecular Polycaprolactone and HAp for Tissue Engineering
Applications, Proceedings of ISPST 2009, A-10- 231-1, Tehran, Iran,
17-21 Oct. 2009.
157. Study on a novel self-assembled injectable system for tissue
engineering application, Proceedings of ISPST 2009, A-10-390-1, Tehran,
Iran, 17-21 Oct. 2009.
158. Effect of nano-hydroxyapatite on the particle size and
morphology of gelatin/nanohydroxyapatite microspheres, Proceedings of
ISPST 2009, A-10- 390-3, Tehran, Iran, 17-21 Oct. 2009.
159. A Novel Porous scaffold Comprising Gelatin/ Chitosan for Skin
Tissue Engineering, Proceedings of ISPST 2009, A-10- 485-2, Tehran,
Iran, 17-21 Oct. 2009.
160. An Investigation on Gelatin/ Chitosan Scaffold Sterilization by
UV Radiation and Autoclave, Proceedings of ISPST 2009, A-10- 485-3,
Tehran, Iran, 17-21 Oct. 2009.
161. Synthesis and Characterization of Biodegradable Poly
(urethaneurea)s Based on PCL/PEG for Tissue Engineering, Proceedings of
ISPST 2009, A-10- 566-1, Tehran, Iran, 17-21 Oct. 2009.
162. Injectable, biodegradable Poly (DL-lactide-co-glycolide)
carboxyl terminated for cartilage tissue engineering: initial in vivo
study, Proceedings of ISPST 2009, A-10- 774-1, Tehran, Iran, 17-21 Oct.
2009.
163. Perforated Polyurethane Scaffold as Cartilage Substitution in
vitro & in vivo Assessments, Proceedings of ISPST 2009, A-10- 774-2,
Tehran, Iran, 17-21 Oct. 2009.
164. Improving Blood Compatibility of a New Generation of Vascular
Grafts by Oxygen Plasma Modification, XXXVII Conference of European
Society For Artificial Organs (EASO), The International Journal of
Artificial Organs, XXXVII ESAO Congress, Congress Issue (Vol. 33, No? –
2010, p. ?) 8- 11 September 2010, Skopje, Macedonia, 2010.
165. Oxygen Plasma Effect on the Surface Properties of a Blood
Compatible Nanocomposite, Proceedings of 3 rd International Conference
on Plasma Medicine (ICPM 3), Greifswald-Germany, Page: 71, 19-24
September, Greifswald-Germany, 2010.
166. Designing and Fabrication of a Biocomposite for Skin Tissue
Engineering, Proceedings of 17th Iranian Conference on Biomedical
engineering 3-4 Nov., Isfahan, Iran, 2010.
167. Surface Modification of POSS-nanocomposite Biomaterials Using
Reactive Oxygen Plasma Treatment to Improve Antithrombogenicity and
Endothelialization, ESAO, The Proceedings of Winter School, Simmering,
p. 63, 26-29 Jan. 2011, Austria, 2011.
168. Biomimetic Modification of Poss-Pcu Nanocomposite Using
Response Surface Methodology, XXXVIII Annual ESAO & IV Biennial IFAO
Congress, 9-12 October 2011, Porto, Portugal, Int J Artif Organs 2011 ,
34, (8) 615, 2011.
169. Silicon Grafted Collagen as a Scaffold for Repairing Tympanic
Membrane Perforations: In Vitro and In Vivo Assays, XXXVIII Annual ESAO
& IV Biennial IFAO Congress, 9-12 October 2011, Porto, Portugal,
Int J Artif Organs 2011 , 34, (8) 689, 2011.
170. Biodegradable Chitosan/Polyethylene Glycol Fumarate Blend
Films, The Proceedings of the PPS 2011, Kish, Iran, 15-17 October 2011.
171. Chitosan Immobilization onto Poly Acrylic Acid Grafted Silicone
as Wound Dressing, Proceedings of 7th International Chemical
Engineering Congress & Exhibition(IChEC 2011), Kish, Iran, 21-24
November, 2011.
172. Rheological Behavior of Chitosan/Polyethylene Glycol Fumarate
Blends in Dilute Solutions, the Proceedings of 9th World Biomaterials
Congress, June 1-5, 2012, Chengdu, China, 2012.
173. Correlation between Biocompatibility and Elasticity of the
Chains of Polypropylne Copolymer, the Proceedings of 9th World
Biomaterials Congress, June 1-5, 2012, Chengdu, China, 2012.
174. Collagen-Immobilized Patch for Repairing of Small Tympanic
Membrane Perforations: A Clinical Study into 10 Patients Ears, the
Proceedings of 9th World Biomaterials Congress, June 1-5, 2012, Chengdu,
China, 2012.
175. The Rheological Study of a Novel Injectable System Based on
Biotinylated Nanocomposite Microspheres, the Proceedings of 9th World
Biomaterials Congress, June 1-5, 2012, Chengdu, China, 2012.
176. A Novel Injectable Bio-nanocomposite for Bone Tissue Engineering Applications, June 1-5, 2012, Chengdu, China, 2012.
177. Investigation on a Novel Injectable Nano-composite Based on
nHA-in-PLGA/NMP for Bone Tissue Engineering, the Proceedings of 9th
World Biomaterials Congress, June 1-5, 2012, Chengdu, China, 2012.
178. Plasma Graft Polymerization of Acrylic Acid and Immobilization
of Heparin to Improve Blood Compatibility of Polyethylene Terephethalate
(PET), Mater. Res. Soc. Symp.Proc. Vol.1469, 2012 Materials Research
Society, DOI: 10.1557/opl.2012.1265, 2012
179. Injectable Scaffold as Noninvasive Technique for Cartilage
Tissue Engineering: In Vivo Case Study, J Tissue Eng Regen Med 2012; 6
(Suppl. 1): 1–429, p. 68, DOI: 10.1002/term.1586, 3rd TERMIS WORLD
CONGRESS 2012, Tissue Engineering and Regenerative Medicine", September
5-8, 2012, Hofburg Congress Center, Vienna, Austria, 2012.
180. Latest Trends of Electrospun Scaffolds in Tissue Engineering
and Regenerative Medicine: A Review, Proceedings of International
Seminar on Polymer Sience and Technology( ISPST 2012 ) Amirkabir
University of technology ( Tehran Polytechnic), 21- 25 October 2012,
Tehran, Iran, 2012.
181. Synthesis of Collagen-Grafted Electrospun Poly(caprolactone)
Nanofibers for Nerve Tissue Engineering, The First Iranian Annual
Congress on Progress in Tissue Engineering and Regenerative Medicine,
18- 20 May 2013, Tehran, Iran, Artif Organs, A39, Vol. 37, No. 7, 2013.
182. Preparation and Characterization of Nano-Composite Scaffolds
from Nano-Hydroxyapatite/Chitosan/Gelatin for Bone Tissue Engineering,
The First Iranian Annual Congress on Progress in Tissue Engineering and
Regenerative Medicine, 18- 20 May 2013, Tehran, Iran, Artif Organs, A44,
Vol. 37, No. 7, 2013.
183. Chitosan/PVA/HEC Electrospun Scaffold for Skin Tissue
Engineering, The First Iranian Annual Congress on Progress in Tissue
Engineering and Regenerative Medicine, 18- 20 May 2013, Tehran, Iran,
Artif Organs, A45, Vol. 37, No. 7, 2013.
184. Fabrication of Gelatin/Chitosan Nano Fibrous Scaffolds for Skin
Tissue Engineering, The First Iranian Annual Congress on Progress in
Tissue Engineering and Regenerative Medicine, 18- 20 May 2013, Tehran,
Iran, Artif Organs, A47, Vol. 37, No. 7, 2013.
185. Fabrication of Gelatin/Chitosan Scaffolds via Salt-Leaching and
Lyophilization and Assessment of their Biological Properties, The First
Iranian Annual Congress on Progress in Tissue Engineering and
Regenerative Medicine, 18- 20 May 2013, Tehran, Iran, Artif Organs, A47,
Vol. 37, No. 7, 2013.
186. Electrospun Nanofibrous Mats as Scaffolds in Tissue Engineering
and Regenerative Medicine: Review of the Latest Trends, The First
Iranian Annual Congress on Progress in Tissue Engineering and
Regenerative Medicine, 18- 20 May 2013, Tehran, Iran, Artif Organs,
A30, Vol. 37, No. 7, 2013.
187. An Engineering Technique for Improvement of the Patency Rate of
Bypass Grafts, The First Iranian Annual Congress on Progress in Tissue
Engineering and Regenerative Medicine, 18- 20 May 2013, Tehran, Iran,
Artif Organs, A32, Vol. 37, No. 7, 2013.
ج-(تالیفات)
1. Author, An Introduction to Polymer Chemistry, Kerman University (notebook), 1980.
2. Author, Jute Reinforced Polyesters, Structures, Properties and their Applications, Kerman University (notebook), 1982.
3. Editor, Proceedings of the 1st National Seminar and Workshop on
Lasers and Their Applications in Polymers, Special Issue of Journal of
Polymer Science and Technology, 10, IPPI publication, Tehran, Iran,
1997.
4. Editor, The Flourishing Iran, Plan and Budget Organization Publication, Tehran, Iran, 1997.
5. Author, Statistical Implying Significance, Center for Strategic Research Publication, Tehran, Iran, 2001.
6. Editor, Proceedings of the 6th Iranian Seminar on Polymer Science and Technology, IPPI Publication, Tehran, Iran, 2003.
7. Seminar’s President and Editor, Proceedings of "Science and
Technology, Future and the Strategies, Technological Priorities for
Iran", Center for Strategic, Research Publication, Tehran, Iran, 18-19
February 2004.
8. Seminar’s President and Editor, Proceedings of the 9th Iranian
Seminar on Polymer Science and Technology (ISPST 2009), IPPI
Publication, Tehran, Iran, 2009.
9. Seminar’s President and Editor, Proceedings of the 10th Iranian
Seminar on Polymer Science and Technology (ISPST 2012), IPS Publication,
Tehran, Iran, 2012.
1. مجموعه مقالات اولین همایش علم و فناوری- آینده و راهبردها (2 جلد)
از انتشارات مرکز تحقیقات استراتژیک، معاونت علوم و تکنولوژی، 20 و 21 دی
ماه 1379، تهران، ایران.
2. مقاله حیاتی شورای ملی علوم و فناوری در افزایش اثربخشی علم و
فناوری برای توسعه اقتصادی - اجتماعی کشور، جلد دوم مجموعه مقالات چهل و
چهارمین نشست روسای دانشگاه‌ها و مراکز علمی- تحقیقاتی کشور، صفحه 87-79 ،
1381، تهران، ایران.
3. مقاله توسعه کشور با محوریت علم و فناوری، مجموعه مقالات ششمین
کنگره سراسری همکاری‌های دولت، دانشگاه و صنعت برای توسعه ملی، صفحه 40-35،
26 تا 27 آذر 1381، تهران، ایران.
4. مجموعه مقالات دومین همایش علم و فناوری- آینده و راهبردها از
انتشارات مرکز تحقیقات استراتژیک، معاونت علوم و تکنولوژی، 29 و 30 بهمن
1382، تهران، ایران.
5. مجموعه مقالات کنفرانس توسعه دانش و فناوری در ایران-راهکارهای
توسعه علم و فناوری، 26 تا 28 آبان 1383، دانشگاه صنعتی شریف، تهران،
ایران.
6. مقاله توسعه کشور در گرو توسعه علم وفناوری– مجموعه مقالات همایش
پژوهش، بهره‌وری، رشد و توسعه اقتصادی، مرداد 1384، موسسه عالی آموزش و
پژوهش، مدیریت و برنامه ریزی، صفحه 605-613، تهران، ایران.
7. گزارش پژوهش ایران در سالهای برنامه پنجساله چهارم توسعه کشور پایش
بر مبنای: : پژوهشگران،مقالات،کتابها، اختراعات و بودجه پژوهشی- گزارش
دبیرخانه هیات موسس دانشگاه آزاد اسلامی 1389.
8. گزارش طرح تدوین برنامه 5 ساله 1394- 1390 و برنامه افق چشم انداز
1404 دانشگاه آزاد اسلامی – دبیرخانه هیات موسس دانشگاه آزاد اسلامی، 1390
د) ثبت اختراعات:
1. Intra-Cochlear Electrode with a Partially Detachable Hydrophilic
Segment for Deferred Self- Positioning, (patent) US 2003/ 0078516A1 and
WO 03/024153 A1.
2. Design and Fabrication of Novel Electrode for Cochlear Implant Applications, Iranian Patent no. 28360, 2002.
3. Reduction of Platelet Adhesion to the Laser Treated PDMS, in vitro Assay, (patent application no. 9720440.8.
4. Preparation and Formulation of Flat Sheet Membrane Based on
Polysulfone for Hemodialysis Applications, Iranian Patent no.32721,
2005.
5. Preparation and Formulation of Hollow Fiber Membrane Based on
Polysulfone for Hemodialysis Applications, Iranian Patent no.32720,
2005.
6. Enhancement of Chitin’s Degree of Deacetylation by Multi Stages Alkaline Treatment, Iranian Patent no.33670, 2006.
7. Design and Fabrication of Multipurpose Ultrasonic Coupler for Diagnosis, Iranian Patent no.33705, 2006.
8. Design and Fabrication of Cryogenic Hydrogels Used in Cold
Operational Surgeries and Maintaining the Fresh Cells and Tissues,
Iranian Patent no.33707, 2006.
9. Harmonization of Woven Artificial Vascular Graft by Crimping Process, Iranian Patent no.34029, 2006.
10. Coating of Woven Artificial Vascular Graft by Graphite to
Improve Biocompatibility Using Electrophoresis Technique, Iranian Patent
no.34030, 2006.
11. Design and Fabrication of a New Methods to Prepare Polymeric
Profiles Based on PP by Using Adhesive or Microwave, Iranian Patent
no.35381, 2006.
12. Fabrication Procedure of Polyurethane Prepolymers Pilot Plant, Iranian Patent, no. 35888, 2006.
13. Enhancement of Biocompatibility and Blood Compatibility of
Polystyrene by Eximer Laser and RF Plasma, Iranian Patent, no. 39374,
2007.
14. Introduce and Identification of Flat Sheet Membrane Defects and Removing Methods, Iranian Patent, no. 38745, 2007.
15. A Novel Method for Reduction of Platelet Adhesion on
hemodialysis membranes for High Performance Applications, Iranian
Patent, no. 38746, 2007.
16. Preparation and Modification of Polyether Sulfone Hollow Fiber
Hemodialysis Membranes for High Performance, Iranian Patent, no. 38747,
2007.
17. Modification and Characterization of In situ Crosslinkable
Polymers by Visible Light for Realizing of Tamoxifen Citrate as
Anti-breast Cancer Drug: in vitro and in vivo Assays: Iranian Patent,
no. 42290, 2007.
18. Pegilation of PPF using PEG Acylation in the Presence of PEO, Iranian Patent, no. 42291, 2007.
19. Cochlear Implant Electrode Configuration for Drug Eluting, Publication Number: US2007/0213799 A1.
20. Repairing of Intestinal Fistula Using Chitosan – thioglycolic Acid Hydrogel, Iranian Patent, no. 48057, 2008.
21. Injectable and Biodegradable Hydrogel Based on Thiolated Chitosan at Physiologic pH, Iranian Patent, no. 48055, 2008.
22. Treatment of Prostate Cancer Using Injectable and Biodegradable
Hydrogel Based on Nano- hydroxyapatite and PLGA, Iranian Patent, no.
47656, 2008.
23. Plasma Surface Modification of PDMS to Improve Fibroblast Cell
Growth for Wound Healing Applications, Iranian Patent, no. 51573, 2008.
24. Chitosan, Gelatin, Collagen and PVA Hybrid Bio-composite for Wound Dressing, Iranian Patent, no. 52658, 2008.
25. RF Plasma –Induced Graft Polymerization of Acrylamide onto Silicone Rubber, Iranian Patent, no. 55972, 2009.
26. Electron Beam Interaction with PP: Evaluation of the Branched PP Copolymer, Iranian Patent, no. 56996, 2009.
27. Drug Delivery System and Method of Making the Same, Pub. No. US2009/0298953A1.
28. Improvement of Bio-medical Properties of Scaffolds Comprising
Natural Biopolymers Using Silicone Membrane, Iranian Patent, no. 64421,
2010.
29. A Technique for Evaluation of Interconnectivity of Pores in the
Scaffolds of Tissue Engineering, Iranian Patent, no. 64420, 2010.
30. Non-Drug Based Wound Dressing Polymer Film and a Method of Producing the Same, Pub. No.: US2011/0218472 A1 Sep. 8 2011.
31. Electrospun Mats Based on PLGA / Gelatin for Tissue Engineering Applications, Iranian Patent, no. 77952, 2012.
4-8- پایان‌نامه‌های دانشجویان کارشناسی ارشد یا دکتری تخصصی (بعنوان استاد راهنما یا استاد مشاور)
As Supervisor or Adviser
No. Graduated Students Thesis Title
1 A. R. Ekbatani (M.Sc., 1995) Laser Grafting of Acrylic Acid onto EPR
2 M. R. Rezaee Darvish (M.Sc., 1997) Preparation and
Investigation of Physical and Mechanical Properties of Biocompatible
Blend Based on PDMS/PHEMA
3 M. Mehralipour (M.Sc., 1998) Evaluation of Platelet Activation onto Laser Grafted Acrylic Acid- EPR (in vitro)
4 M. T. Khorasani (Ph.D., 1997) PDMS Surface Modification by
Laser Irradiation: A Novel Technique for the Preparation of Blood
Compatible Polymers (in vitro & in vivo)
5 A. Sheikholmoloki (M.Sc., 1998) Theoretical and Experimental
Investigation of Protein Adsorption on Soft Contact Lenses, in vitro
6 M. Mohseni (M.Sc., 2000) Evaluation of Physical, Mechanical and
Electrical Properties of Elastomeric Blend based on PDMS/EPR
7 N. Sheikh (Ph.D., 2000) Isocyanate-Terminated Urethane
Prepolymer as Bioadhesive Material: Synthesis and Characterization and
Biocompatibility Evaluation (in vitro & in vivo)
8 M. Dadsetan (Ph.D., 1999) Effect of CO2 and Excimer Laser
Radiation on the Biocompatibility of Polyethylene Terephthalate (in
vitro & in vivo)
9 S. Kheirandish (M.Sc., 2000) Effect of Hydrogel content on
Properties of a Composites Based on RTV Silicone Rubber on Matrix and
Crosslinked Poly (acrylic acid) Particles as the Dispersed Phase
10 A. R. Sadegee (M.Sc., 1999) Design and Fabrication of an Orthopedic Plate Based on Polymeric Composites
11 R. Motazaker (M.Sc., 1999) Preparation of Hydrophilic Vulcanized Networks Based on Polychloroprene- Poly HEMA Blends
12 H. Keshvari (M.Sc., 2000) PDMS Surface Laser Grafting Using Acrylic Acid for Collagen Immobilization (in vitro)
13 M. R. Jafari (M.Sc., 2000) Manufacturing of a Polymeric Ocular
Prosthesis for Therapy of Glaucoma, (in vitro & in vivo)
14 D. Falahi (M.Sc., 2001) Physical, Mechanical and
Biocompatibility Evaluation of Three Different Types of Silicone Rubber
(in vitro)
15 F. Shokrolahi (M.Sc., 2001) Effect of Silicone Rubber Crosslink Density on Fibroblast Cells Behavior: in vitro
16 R. Ghavamzadeh (M.Sc., 2001) Bioadhesion and Biocompatibility
Evaluation of Gelatin and Polyacrylic Acid as a Crosslinked Hydrogel: in
vitro
17 M. Ghias (Ph.D., 2001) Monte Carlo Simulation of Non-Linear
Free Radical Polymerization Using a Percolation Kinetic Gelation Model
18 F. Abbasi (Ph.D., 2002) Bulk and Surface Modification of Silicon Rubber for Biomedical Applications
19 A. Vakili (M.Sc, 2003) Preparation of Porous Chitosan with Different Molecular Weight Using Lyophilizing System
20 B. Bahrami (Ph.D., 2003) Poly (vinyl alcohol)/ Chitosan/ Gelatin Blend Film as Wound Dressing (in vitro & in vivo)
21 H. Nojehdehian (M.Sc., 2003) Effect of Fluoride on Properties of Apatite Cement
22 H. Arabi (Ph.D., ) Evaluation of blood Compatibility of Artificial Vascular Graft Based on Carbon Coated Dacron.
23 R. Mehdinavaz (M.Sc, ) Enhancement of E- coli Adsorption onto Laser Treated PET Film Surface
24 J. Barzin (Ph.D., ) Preparation and Formulation of Flat and Hollow Fiber Hemodialysis Membrane
25 S. Karbasi (Ph.D., ) Evaluation of Physical Environment
Effect on Chondrocyte Cells Seeded onto Porous and Biodegradable
Polyurethane Scaffolds
26 M. Khakpour (Ph.D., ) Contraceptive Agents Release from an In Situ Forming Drug Delivery System : In vitro
27 Y. Ghazizadeh (M.Sc., ) Evaluation of Effectiveness of
Chitosan Hydrogel to Prevent Lung Fistula from Bleeding and Air Leakage
28 A. Parvin (M.Sc., ) Plasma –Induced Graft Polymerization of Acrylamide onto Silicone Rubber.
29 E. Vahedi Moghadam (M.Sc., ) KrF Laser Induced
Nano-Structuring onto Polyethyleneterephtalate ( PET) by Different
Repetition Rate : Evaluation of the Biocompatibility of the Treated
surfaces: in vitro
30 Sh. Bagheri (M.Sc., ) Comparison the Effect of Eximer Laser
and RF Plasma on Polystyrene Surface Based on Biocompatibility
31 A. Fakhari (M.Sc., ) Evaluation of Aphthous Fever Virus Realizing from PLGA Nanoparticles
31 A.Sadat Hashemi (M.Sc., ) Preparation of PEG Based
Biodegradable Polymeric Networks with Application in Topical Drug
Delivery
33 A.R.Toloe (Ph.D., ) UHMWPE/Hydroxy Apatite/PDMS as Hip Joint: Design, Manufacturing and Biocompatibility Evaluation
34 Y. Mohammadi (Ph.D., ) Bone Tissue Engineering Using Chitosan/Gelatin/TCP Porous Scaffolds: In vivo Study
35 E. Nejati (M.Sc., ) Preparation of Nanocomposite Scaffolds Comprising HA/ PLLA for Bone Tissue Engineering
36 A.Karkhaneh (Ph.D., ) Preparation and Modification of the
Surface Properties of PDMS to Immobilize Collagen Cornea Application: in
vitro & in vivo.
37 M. Rafeenia (Ph.D., ) Preparation of PLGH-Injectable Implant
Delivery System, as in situ Forming for Release of Corticosteroidal
Drugs: In vitro & in vivo
38 Sh. Sharifi (Ph.D., ) Synthesis & Characterization of
Biodegradable, Injectable Polycaprolactone – Fumarate (PCLF) Based Drug
Delivery Systems Containing Anticancer Agent: In vitro & in vivo.
39 S. Eftekhari (M.Sc., ) Plasma surface modification of PET to
improve blood compatibility and grafting with acrylic acid and heparin:
in vitro
40 E. Dashti Moghadam (M.Sc., ) Chemical Modification of
Chitosan (Thiolation) to Enhance Bio- adhesiveness : in vitro & in
vivo Assays
41 M. Enayati (M.Sc., ) In situ Forming and Control Released of
Leuprolide in the Treatment of Prostate Cancer: in vitro & in vivo
Assays
42 M. Zandi (Ph.D., ) Evaluation of Molecular Network Formation
of Gelatin and Biomineralized Gelatin for Biomedical Application :
Rhehological and NMR Studies
43 H. Syednejad (M.Sc., ) Preparation and Evaluation of Dextran Microspheres as Hemostatic Agent
44 H. Keshvari (Ph.D., ) Collagen Immobilization onto Acrylic
Acid Laser-grafted Silicone for Using as Artificial Skin: in vitro &
in vivo
45 F. Farahmand (Ph.D., ) Drug Eluting Silicone ٍElastomer for Biomedical Applications
46 Taghizadeh (Ph.D., ) Effect of Formulation Variables on the
Design of an Acrylic/Silicone Pressure Sensitive Adhesive ( PSA) System
for Transdermal Delivery of Fentanyl
47 P. Shokrolahi (Ph.D., ) Preparation and Characterization of Supra- Molecular Polymers
48 M. Koosha (M.Sc., ) Electron Beam Interaction with PP: Biocompatibility Evaluation of the Branched PP, in vitro
49 M. Pezeshki (M.Sc., ) Preparation and Characterization of Gelatin/Chitosan-
Silicone Membrane Bilayer Scaffold for Skin Tissue Engineering
50 A. Talebi (M.Sc., ) Fabrication of Porous Scaffolds Based on PLA by Thermally Induced Phase Separation Method
51 S. Kamrani Kamkar (M.Sc., ) Relationship Between
Microstructure and Antibactrial Activity in UV Degradable Interfacially
Compatibilized Film Grade LDPE/ TiO2 Nanocomposites
52 A. Solouck (Ph.D., ) Surface Modification of a Hybrid
Nano-composite Based on PU by Plasma to Improve its Blood Compatibility
53 M. Aghaee (M.Sc., ) Chitosan Hydrogels Containing Glucontime as Wound Healing Agent: In vitro and In vivo Assays
54 E.Babaee (M.Sc., ) Skin Tissue Engineering
55 M.Saeed (M.Sc., ) Skin Tissue Engineering
56 F. Shokrolahi (Ph.D.) Synthesis & Characterization of
Biodegradable, Injectable Polyurethane Urea for Bone Tissue Engineering:
In vitro & in vivo
57 M.Rastegar ( MSc ) Plasma Treated Chitosan films for Wound Healing Applications.
58 A. Sadat Hashemi (Ph.D ) Preparation and Evaluation of a Wound
Dressing Hydrogel Based on Chitosan/ Unsaturated Fumarate Polyester
59 A. Mirzaei (M.Sc.) Plasma Surface Modification of PU/Chitosan Electrospun Mat as a Wound Dressing.
60 H. Peydayesh (M.Sc.)
Preparation and Evaluation of Chitosan/ Alginate Electrospun Mat for Skin Tissue Engineering Applications.
61 H.Mahdavi ( Ph.D) Design and Fabrication of Wound Dressing
Films Comprising Chitosan/Collagen/Polyvinyl alcohol/Nano clay: in vitro
and in vivo Assays
No. Present Students Research Area
1 E. Dashti Moghadam (Ph.D)
Design and Fabrication of Composites Hydrogel Based on Modified
Chitosan for Tamoxifen Citrate Delivery to Enhance Wound Healing: in
vitro & in vivo Assays.
2 M. Pezeshki (Ph.D) Electrospun Nanofibers Comprising Chitosan/Gelatin /GAG for Skin Tissue Engineering.
3 Y. Ghazizadeh (Ph.D) Preparation & Evaluation of
Electrospun Chitosan-based Nanofiber for Wound Dressing Applications.
4 M. Koosha (Ph.D) Preparation a Nanocoposite Electrospun
Comprising Chitosan / Hyaluronic Acid/ and Nanosilicate for
Treatment of Diabetic Ulcers
5 J. Kia (M.Sc.) Design and Fabrication of Chitosan Scaffolds for
Treatment of Diabetic Ulcers: Comparison Electrospun Mats with Solvent
Casting Membrane.
6 M. Saeedi (M.Sc.) Osteoblast Cell Encapsulation Using Gelatin/Alginate Blend for Bone Tissue Engineering Applications.
7
R.Dimercheli (M.Sc.) Electrospun Nanofibers Comprising Chitosan/Alginate for Skin Tissue Engineering.
8 Z.Bagher ( Ph.D) Differentiation of Mesenchymal Stem cells
(MSCs) derived from Umbilical Cord to Neurons Using PCL/Collagen
Scaffolds: In Vitro
9 Z. Jamalpour( Ph.D) The Study of Endothelial Cells Effect in
differentiation of Warton's Jelly Mesenchymal Stem Cells (MSCs) to
Osteoblast on Gelatin/ Chitosan Nano-hydroxyl Apatite Scaffolds :In
Vitro
5 - در باره دکتر حمید میرزاده
اینجانب حمید میرزاده در سال 1329 در سیرجان به دنیا آمدم تا اخذ دیپلم
ریاضی در سیرجان تحصیل کردم و پس از آن دردوره کارشناسی شیمی از دانشگاه
فردوسی مشهد درسال 1352 فارغ التحصیل شدم و پس از طی دوره سربازی در سال
1354 به عنوان دبیر شیمی در دبیرستانهای سیرجان مشغول به کار شدم. سپس در
سال 1355 برای ادامه تحصیلات به تهران آمدم ودر پلی تکنیک تهران برای دوره
کارشناسی ارشد مهندسی پلیمر پذیرفته و در سال 1357 با معدل(20=A) فارغ
التحصیل شدم و از فروردین 1358 بعنوان عضو هیات علمی در دانشگاه شهید
باهنر کرمان استخدام شدم. در سال 1373 موفق به دریافت درجه دکترا در همین
رشته از دانشگاه نیوساوت ویلز استرالیا (UNSW) شدم .
اینجانب متاهل بوده و فرزندانم بحمدالله در سطوح دکتری ،کارشناسی ارشد، و
کارشناسی تحصیل کرده یا مشغول تحصیل هستند. خوشحالم که بیش از 35سال از
عمرم را در خدمت به انقلاب بوده و در3 دولت بعد از انقلاب اسلامی ( دولت
شهید رجائی ، دولت مهندس موسوی و دولت آقای هاشمی رفسنجانی) در امور اجرائی
و خدمت به مردم مسئولیت داشته ام و همواره ارجاعات مقام معظم رهبری که
مربوط به امور اجرائی می شد چه در زمانی که معظم له رئیس جمهور بودند و چه
بعد از آن با افتخار انجام می دادم.
از سال 1359 تا سال 1376 درسمت های فرماندار سیرجان ، استاندار کرمان
،معاون نخست وزیر، معاون اجرایی رئیس جمهور و معاون رئیس جمهور ورئیس
سازمان برنامه و بودجه مشغول فعالیت بوده ام. اما همزمان با کار های اجرایی
به امر تدریس و تحقیق در دانشگاه و مراکز تحقیقاتی می پرداختم. به اذعان
دوستانم از معدود مدیران ارشد کشور بوده ام که با وجود کارهای سخت
وسنگین،که یکی از آنها بازسازی مناطق جنگ زده و مسئولیت ستاد بسیج اقتصادی
کشور بود، هیچ‌گاه کسوت دانشگاهی خود و دانشگاه را ترک نکرده و به شهادت
همه دانشگاهیان در سمت‌های مختلفی که داشته ام چه در سمت استاندار یا
معاون اجرایی نخست وزیر و چه در سمت معاون رئیس جمهور و رئیس سازمان برنامه
و بودجه کشور با تمام وجود و علاقه از امر توسعه علمی وفناوری کشور حمایت
و پشتیبانی عملی کرده ام.
در سال 1364 براساس پیشنهاد اینجانب (معاون اجرایی نخست وزیر وقت) و
موافقت نخست وزیر وقت در خصوص لزوم رشد صنایع وابسته به نفت از جمله تولید
مواد پتروشیمیایی و مصنوعات پلیمری با شرکت سیاست‌گذاران و دست‌اندرکاران
اجرایی، تحقیقاتی و آموزشی کشور کمیسیون هماهنگی علوم و تکنولوژی مواد
پتروشیمیایی و صنایع پلیمری تشکیل و مسئولیت ایجاد هماهنگی برای پیش‌برد
این امر به عهده ام گذاشته شد. با پیشنهاد کمیسیون مزبور و تصویب شورای
گسترش آموزش عالی، مرکز تحقیقات و توسعه علوم و تکنولوژی مواد پلیمری و
پتروشیمیایی در سال 1365 تاسیس شد که با استقرار در بنای اصلی و توسعه آن
در اثر تلاش‌ها و حمایت‌های مستمر اینجانب پژوهشگاه پلیمر و پتروشیمی
ایران نام گرفت که هم اکنون یکی از پژوهشگاه‌های برتر کشور وبی‌نظیر در
منطقه وکم نظیر در جهان است.
با توجه به نقش مؤثر سازمان برنامه و بودجه، تاسیس معاونت پژوهشی، آموزشی و
فرهنگی، که تا سال 1374 درتشکیلات این سازمان وجود نداشت، از اقدام‌های
بنیادی و مهم اینجانب بود که موجب افزایش شدید بودجه دانشگاه‌ها ومراکز
پژوهشی شد مبنای خوبی برای سالهای بعدی گردید. تدوین برنامه"ایران 1400"،
برنامه" اقتصاد بدون نفت" و طرح"فقر زدایی" و سرشماری سال 1375 از دیگر
اقدامات مهم بنده در دوران تصدی سازمان برنامه وبودجه بود.
تاسیس شهرک‌های تحقیقاتی پژوهش (تهران) در سال 1364 و کاوش (کرج) در سال
1369 و مرکز رشد فناوری پلیمر درسال 1381 و همکاری در تاسیس موسسه دانش و
پژوهش ایران در سمت نایب رئیس هیئت امنای این موسسه و نیز بنیان‌گذاری
موسسه توسعه فناوری نخبگان با همکاری دفتر همکاری‌های فناوری ریاست جمهوری و
جمعی از وزرای دانشگاهی درسال 1381 و همکار ی با مرکز تحقیقات استراتژیک
در سمت معاون علوم وفناوری مرکز تا سال 1384 و نیز صندوق حمایت از
پژوهشگران کشور ریاست جمهوری از سال 1383 نشانگر دل‌مشغولی اینجانب برای
توسعه کشور بر مبنای علم و فناوری است.
در سال 1376 توسط دولت آقای خاتمی ازادامه خدمت در سازمان برنامه و
بودجه معاف شدم و بنابراین فرصت بیشتری پیدا کردم تا فعالیت‌های علمی و
پژوهشی خود را گسترش داده و در کنار همکاری با مرکز تحقیقات استراتژیک (
از سال 1374 تا 1386 )در سمت معاون علوم وتکنولوژی در امر نظریه‌پردازی
برای توسعه علمی ایران مشغول شدم. اما همچون گذشته در دانشکده‌های مهندسی
پلیمر و مهندسی پزشکی دانشگاه صنعتی امیرکبیر و پژوهشگاه پلیمر و پتروشیمی
ایران کار تدریس و تحقیق را ادامه می دهم که تاکنون چند بار به عنوان
پژوهشگر نمونه در دانشگاه صنعتی امیر کبیر و پژوهشگاه پلیمر وپتروشیمی
ایران و در سال 1387 نیز به عنوان استاد نمونه کشوری انتخاب شدم و چندین
بار هم از جشنواره های خوارزمی و رازی مفتخر به دریافت جایزه پژوهشگر برتر
در زمینه پلیمر های پزشکی شدم.
از سال 1358 تا کنون عضو هیئت علمی دانشگاه شهید باهنر کرمان ، عضو هیئت
علمی پژوهشگاه پلیمر و پتروشیمی ایران و دانشگاه صنعتی امیرکبیر هستم
واخیرا با دانشگاه علوم پژشکی ایران برای تدریس دوره مهندسی بافت همکاری
دارم. مدت 33 سال است که افزون بر کارهای اجرایی متعدد و همزمان به کار
تدریس و پژوهش اشتغال داشته و دارم و هم اکنون استاد تمام پایه 37 دانشگاه
صنعتی امیر کبیر هستم. حاصل فعالیت های علمی وپژوهشی اینجانب تا کنون
328 مقاله علمی پژوهشی ( 141 مقاله ژورنال با نمایه ISI و 187 مقاله
کنفرانس ) ،چند ین کتاب و گزارش علمی و 31 ثبت اختراع و اجرای ده‌ها پروژه
پژوهشی و فارغ‌التحصیلی نزدیک به 60 نفر در دوره های کارشناسی ارشد و
دکتری در رشته مهندسی پلیمر بوده است. در حال حاضر بر پایه پایگاه علمی
,Scopus 2013 h. Index علمی اینجانب22 است .
از سال 1376 تا کنون از 7 دوره 6 دوره رئیس انجمن پلیمر ایران بوده ام و
طی سالهای گذشته موفق شده ام 10 سمینار بین المللی علوم و تکنولوژی پلیمر
ایران را برگزار و در انتشار واژه نامه پلیمر ایران و نزدیک به 24 جلد از
دانشنامه پلیمر ایران و بانک اطلاعات پلیمر ایران با همکاری اعضائ انجمن
پلیمر ایران توفیق داشته ام. همچنین 23 سال دو ماهانه علمی پژوهشی علوم و
تکنولوژی پلیمر( فارسی) و 20 سال مجله بین المللی Iranian Polymer
Journal (تنها مجله ماهانهISI ایران) را در سمت مدیر مسئول و سردبیر منتشر
کردم. از سال 2011 میلادی با موافقت دانشگاه آزاد اسلامی و انتشارات بین
المللی Springer کار تاسیس یک ژورنال بین المللی
بنام Progress in Biomaterials و به عنوان مدیر مسئول آن ژورنال را شروع کرده ام که تا کنون 3 شماره آن منتشر شده است.
در سال 1386 با دعوت حضرت آیت الله هاشمی رفسنجانی رئیس محترم هیات موسس و
هیات امنائ دانشگاه آزاد اسلامی و با تصویب شورای عالی انقلاب فرهنگی به
عنوان عضو هیات موسس دانشگاه آزاد اسلامی و دبیر این هیات و با تصویب هیات
موسس بعضویت هیات امنائ دانشگاه درآمده و در این مجموعه بی نظیر علمی که
بزرگترین دستآورد علمی فرهنگی انقلاب اسلامی و بزرگترین دانشگاه حضوری
جهان است افتخار خدمتگزاری دارم. بررسی پژوهش ایران در سالهای برنامه
پنجساله چهارم توسعه کشور برای تمام بخشهای خصوصی و دولتی برای اولین بار
بعنوان یک طرح ملی و تهیه اساسنامه جدید دانشگاه آزاد اسلامی از اقدامات
مهمی بود که در دبیرخانه هیات موسس دانشگاه آزاد اسلامی انجام شد.اخیرا
نیز موفق شدیم تا با همکاری دانشگاه آزاد اسلامی و دفتر ریاست هیات امنائ
آیین نامه تشکیل هیاتهای امناء استانها و نیز برنامه پنجساله 1394-1390 و
برنامه استراتژیک دانشگاه آزاد اسلامی تا افق 1404 را تهیه و تدوین و به
تصویب هیات موسس و هیات امنائ دانشگاه برسانیم. البته اگر در زندگی
اجرایی و علمی توفیقی داشته ام فقط عنایت الهی و دعای خیر والدین عزیزم
بوده است و وَمَا تَۣو�'فِیۣقِی إلَ�'ا بِاللَهِ، عَلَی�'ۣهِ
تَوَکَ�'ۣل�'تُ وَإلَۣی�'هِ أُنِۣیبُ.
حمید میرزاده
شما می توانید مطالب و تصاویر خود را به آدرس زیر ارسال فرمایید.
bultannews@gmail.com
با این سوابق، واقعا اونهایی که خسرو دانشجو رو رئیس کردند به کشور ظلم کرده بودند! کد ملی؟ شماره تلفن؟ آدرس؟ اونم توی بیوگرافی! واقعاً چرا؟ تبریک به دولت جدید که افراد را بر اساس توانمندیهای اجرایی و سوابق درخشان علمی پژوهشی انتخاب می نمایند. دست خدا همراهتان باشد. این رویه خداپسندانه را ادامه دهید تا کار به کاردان سپرده شود. مردم هم برایتان دعا می کنند. 
